SkyStars F722 Mini HD Pro 20x20 Flight Controller

NOTE: We suggest running a Electrolytic capacitor on 4s builds. Even though we tested and designed it to not need one, all builds are different and there are always exceptions.

The SkyStars F7 3-6S 20x20 HD Flight Controller features 6 hardware UARTS (UART1,2,3,4,5,6), STM32F722RGT6 216MHz MCU, buzzer pad, barometer, Betaflight OSD & DJI HD OSD and supports DJI!

Features

• For corners have LED Pads that support WS2812 Programmable LED.
• Supports serial receivers (CRSF,SBUS, iBus, Spektrum) and 3.3V Satellite Receiver.
• High-performance / low-noise / high sensitivity IMU. BMI270 with 6-axis gyro and accelerometer
• Plug and connect Port for DJI HD Air Unit Module (connector cables Included)
• Input voltage 10V-26V (3-6S)

Specifications

•  MCU:  STM32F722RGT6 216MHz
• IMU: MPU6000 (SPI)
• OSD: Betaflight OSD &  DJI HD OSD (UART6)
• 6 hardware UARTS (UART1,2,3,4,5,6)
• Barometer: YES
• Buzzer Pad: YES
• 5V 2A & 10V 2A
• Input Voltage: 3-6S Lipo
• Blackbox: 16MB
• Firmware: SKYSTARS F7HDPRO
• Dimensions: 31x30x7.8mm
• Mounting Holes: Standard 20mm/M3 or M2 square to the centre of holes
• Weight: 6g

Package Contents

• 1 x SkyStars F7 3-6S 20x20 HD Flight Controller