null

SkyStars F722 Mini HD Pro 20x20 Flight Controller

$63.99
SKU:
SK-K1

SkyStars F722 Mini HD Pro 20x20 Flight Controller

NOTE: We suggest running a Electrolytic capacitor on 4s builds. Even though we tested and designed it to not need one, all builds are different and there are always exceptions.

The SkyStars F7 3-6S 20x20 HD Flight Controller features 6 hardware UARTS (UART1,2,3,4,5,6), STM32F722RGT6 216MHz MCU, buzzer pad, barometer, Betaflight OSD & DJI HD OSD and supports DJI!

Features

  • For corners have LED Pads that support WS2812 Programmable LED.
  • Supports serial receivers (CRSF,SBUS, iBus, Spektrum) and 3.3V Satellite Receiver.
  • High-performance / low-noise / high sensitivity IMU. BMI270 with 6-axis gyro and accelerometer
  • Plug and connect Port for DJI HD Air Unit Module (connector cables Included)
  • Input voltage 10V-26V (3-6S)

Specifications

  •  MCU:  STM32F722RGT6 216MHz
  • IMU: MPU6000 (SPI)
  • OSD: Betaflight OSD &  DJI HD OSD (UART6)
  • 6 hardware UARTS (UART1,2,3,4,5,6)
  • Barometer: YES
  • Buzzer Pad: YES
  • 5V 2A & 10V 2A
  • Input Voltage: 3-6S Lipo
  • Blackbox: 16MB
  • Firmware: SKYSTARS F7HDPRO
  • Dimensions: 31x30x7.8mm
  • Mounting Holes: Standard 20mm/M3 or M2 square to the centre of holes
  • Weight: 6g

f7minihdpro-km45-spec.jpg

Package Contents

  • 1 x SkyStars F7 3-6S 20x20 HD Flight Controller
Width:
3.00 (cm)
Height:
2.00 (cm)
Depth:
0.50 (cm)
Mounting:
20x20
CPU:
F7