null

HappyModel 1-2S Mobula8 Whoop - ELRS UART

$162.99
SKU:
HM-Y2

Out of Stock

Out of Stock

HappyModel 1-2S Mobula8 Whoop - ELRS UART

*May differ from pictures shown. 

Are you tired of the power performance of the 1S whoop you own? Do you want more power to ripping and roaring in your backyard? Yes, here comes Mobula8, which is Happymodel’s first attempt on 85mm frame. It comes with X12 series flight controller, EX1103 KV11000 motor and Gemfan Hurricane 2023 tri-blade propeller, which has excellent power performance and extremely smooth flight.

 

FEATURES

  • X12 Pro 5-IN-1 AIO flight controller built-in 2.4G ELRS V3.0 via UART and OPENVTX
  • VTX Power up to 400mw
  • EX1103 KV110000 motors
  • CaddxFPV Ant FPV camera
  • Smooth and powerful
  • Compatible for 1S-2S Lipo/LIHV battery
  • 3D Printed Camera Lens Protector

SPECIFICATIONS

Motors

  • Mode: EX1103 KV11000
  • Configuration: 9N12P
  • Stator Diameter: 11mm
  • Stator Length: 3mm
  • Shaft Diameter: Φ1.5mm
  • Motor Dimension(Dia.*Len): Φ13.5mm*15.5mm
  • Weight(g): 3.8g
  • No. of Cells(Lipo): 1-2S

Propellers

  • Weight: 0.88g
  • Material: PC
  • Pitch: 2.3inch
  • Props Diameter: 52.17mm
  • Center Thickness: 5mm
  • Center Hole Diameter: 1.5mm

Flight controller

  • X12 ELRS Pro v1.1 AIO 5-IN-1 Flight controller
  • MCU:STM32F411CEU6 (100MHZ, 512K FLASH) ,ESP32-PICO-D4
  • Sensor: ICM42688P(SPI connection)
  • Mount hole size: 25.5mm*25.5mm
  • Power supply: 1-2S battery input (DC 2.9V-8.7V)
  • Built-in 12A(each) Blheli_S 4in1 ESC
  • Built-in Betaflight OSD(SPI Control)
  • Built-in 5.8G OpenVTX 0mw~400mw (MSP control)
  • Built-in UART ExpressLRS v3.0.0
  • Built-in voltage meter sensor , voltage meter scale 110
  • Built-in current meter sensor , current meter scale 470

Onboard 4in1 ESC

  • Power supply: 1-2S LiPo/LiPo HV
  • Current: 12A continuous peak 15A (3 seconds)
  • Support BLHeliSuite programmable
  • Firmware target: Z_H_30
  • Default protocol: DSHOT300
  • Support Bluejay firmware

Onboard UART ExpressLRS 2.4GHz Receiver

  • Packet Rate option: 50Hz/150Hz/250Hz/500Hz
  • ExpressLRS Firmware version: V3.0
  • RF Frequency: 2.4GHz
  • Antenna : SMD antenna
  • Telemetry output Power: <12dBm
  • Receiver protocol: Serial_based CRSF
  • Compatible with ExpressLRS V3.x.x TX Module
  • Could flash single ELRS receiver firmware by Wifi
  • ExpressLRS firmware target: Generic ESP32 2.4Ghz Rx and VTx

Onboard 5.8g OPENVTX

  • Firmware version: OPENVTX
  • SmartAudio v2.1
  • PIT Mode support
  • RCE Mode support
  • Channels: 37ch
  • Transmitting Power: 0/RCE/25mw/100mw/400mw
  • Power supply: DC 5V
  • Current (5v): <650ma (400mw)

Caddx ANT 1200TVL Camera

  • Image Sensor: 1/3″ CMOS Sensor
  • Horizontal Resolution: 1200 TVL
  • TV System: NTSC or PAL
  • IMAGE: 16:9 or 4:3
  • Synchronization: Internal
  • Electronic Shutter: PAL: 1/50~100,000; NTSC: 1/60~100,000
  • S/N Ratio : >52dB (AGC OFF)
  • Video Output: CVBS
  • Lens: 1.8mm
  • Min. Illumination: 0.001Lux@F1.2
  • Auto Gain Control: YES
  • WDR: Global WDR
  • DNR: 3D DNR
  • Dimensions: 14*14mm(with bracket to 19*19mm)
  • Wide Power Input: DC 3.7-18V
  • Weight: 2g (N.W.)

PACKAGE Contents

  • 1 x Happymodel Mobula8 1-2S 85mm Analog Micro FPV Whoop Drone 
  • 1 x Gemfan Hurricane 2023 tri-blade propellers (4CW+4CCW)
  • 1 x Screw Driver
  • 1 x Extra camera canopy
Width:
23.00 (cm)
Height:
15.00 (cm)
Depth:
8.00 (cm)
Receiver Type:
ExpressLRS