The Walksnail Avatar HD Pro Kit features a VTX with enhanced TVS protection and support for up to 6S. This VTX delivers unmatched stability and resistance to GPS interference with a wide input voltage range of 6V to 25.2V. This kit also features 1080P compatibility, high frame starlight, a 4KM range, and 32GB built-in storage.  Enjoy the unparalleled performance and take your FPV adventures to new heights with this cutting-edge technology!

• 1080P 120fps compatibility
• Sony Starvis Ⅱ Technology
• Built-in 32GB storage
• High frame starlight
• Lightweight design
• 22ms low latency
• Ranging Mode
• 4km range
• 6V-25.2V
• FOV 160°

HD PRO CAMERA

• Resolution: 1080P/60fps;720P/120fps,720P/60fps;1080P/120fps compatibility;
• Image Sensor: 1/1.8-Inch Sony Starvis Ⅱ Sensor
• Model: Avatar HD Pro camera
• Min.Illumination: 0.00001Lux
• Dimensions: 19*19*24mm
• Shutter: Rolling shutter
• Coaxial Cable: 140mm
• Ratio: 16/9; 4/3
• Aperture: F1.6
• Weight: 9.5g
• Lens: 8Mp
• FOV: 160°

AVATAR V2 VTX 

• Transmitter Power (EIRP: FCC:<30dBm;CE:<14dBm;SRRC:<20dBm; MIC:<25dBm
• Supported FC System: Betaflight; Inav; Fettec; ArduPilot;Kiss
• 1/O Interface: JST1.0*4(Power in)JST0.8*6(USB)
• Communication Frequency: 5.725-5.850GHz
• Mounting Holes: 25.5*25.5mm; 20*20mm
• Operating Temperature: -20-40℃
• Dimensions: 33.5*33.5*10.5mm
• Latency: Average delay 22ms
• Wide Power Input: 6V-25.2V
• Model: Avatar V2 module
• Recording: 1080p/720p
• OSD: Canvas mode
• Antenna: 1(IPEX)
• Storage: 32G
• Weight: 17.6g
• Channels: 8

AVATAR V2 ANTENNA

• Frequency range: 5600MHz-6000MHz
• Size: R15 X 45mm(without cable)
• Input Impedance: 50Ω
• Polarization: LHCP
• Interface: IPEX-1
• Gain: 1.9dBi
• VSWR: ≤1.5
• Weight: 2g

• 1x Walksnail Avatar V2 VTX - 32GB w/ Gyro
• 1x Walksnail Avatar HD Pro Camera
• 1x Walksnail Avatar V2 Antenna
• 1x USB transfer extension cable
• 4x M2*5*0.5mm gasket
• 1x 4 Pin silicone cable
• 4x M2*14mm screws
• 8x M2*4mm screws
• 4x M2*5mm screws
• 4x M2*6mm screws