Now with AM32 firmware. This is the AM32 version of the Jupiter SL80A: open-source firmware you can flash and configure yourself.

Photos show the BLHeli_32 model (labelled "BL32 128K"); the hardware is the same.

Skystars Jupiter SL80A AM32 ESC

JUPITER SL80 AM32 Dshot600 Single ESC was designed to give your motors smooth power with great stability and durability. The 32bit G071 MCU and 12 PCS Low ESR MosFets bring faster-responding speed and smoother flying experience.

The ESC does not have a BEC.

FEATURES

• 2-8S input (max 8S)
• 80A 8 layers 4OZ copper PCB, better operating load capacity;
• 14 pieces TDK MLCC Low ESR capacitors, lower ripple and more stable;
• Top grade 40V MOSFET, stable and reliable;
• 1*RGB LED for power- on display;
• Rational layout, large soldering pad, countersinks and semicircle orifices enable each layer to be energized after power-on.

SPECIFICATIONS

• Dimension: 42.6*22mm
• Weight: 15g(±2g)
• Supports 2-8S LiPo input
• STM32G071 MCU, 48Mhz Runs AM32 Firmware
• Capacitance: total 300UF Low ESR
• Telemetry output
• BEC: No
• Supports: DShot DShot150/300/600/MultiShot/OneShot PWM Drive
• Target: SKYSTARS_SL80A

• Support:
• Current Sensor
• Telemetry output
• Motor Timing
• Brake on Stop

PACKAGE CONTENTS

• 1 x JUPITER SL80 Single ESC
• 2 x 63V 390UF capacitor
• 1 x Power cables & ESC signal wires