SkyStars F722 HD Pro 3 & KM50 Combo Stack

Features

• Excellent over-current capability

By adopting the best PCB material and PCB production process. Such as application of high TG materials, 3oz copper PCB & 2μm gold deposition process on PCB. Together with a 6-layer layout design of the board, compared with others that commonly use 4 layers, allowing it to withstand higher current.

• Extreme stability and support of 6S LiPo battery

By use of 24 pcs of new Toshiba standard 40V 5x6 Mosfet & electronics imported from USA and Japan.  Plus advanced lead-free SMT Processing technology. It makes ESC fully support the 6s battery and get better performance.

• Better Control Performance

Flashed with the latest BLHeli_32 firmware in factory, support telemetry functions (including voltage, RPMS, & current)

ESC Specifications

• Mounting Holes: 30.5x30.5 M4 with M3 Gummies
• Supports 3-6S
• ESC weight: 17g
• ESC onboard current sensor.
• Continuous current: 50A
• Peak current [10 seconds]: 60A
• Overcurrent Protection : Yes
• ESC Protocol : Dshot 600/1200
• Firmware: BLHeli_32
• BEC: No
• Dimensions: 41*46*7.6mm

Flight Controller Specifications

• Brand Name: Skystars
• Model: F722 HD Pro 3
•  MCU: STM32F722RGT6 216MHz
• Gyro: BMI270
• OSD: Betaflight OSD & DJI HD OSD (UART6)
• BEC Output: 5V 3A & 10V 3A
• LDO 3.3V: Max.250mA
• Input Voltage: 3-6S Lipo
• Blackbox: 16MB
• 6 hardware UARTS (UART1,2,3,4,6)
• Dimensions: 39x39mm
• Mounting Holes: 30.5x30.5 M4 with M3 Gummies
• Weight: 6.9g
• FC Firmware:
• BetaFlight firmware: SKYSTARSF722Pro
• INAV firmware:SKYSTARSF722HD

Package Contents

• 1 x SkyStars F7 Flight Controller
• 1 x SkyStars KM50 BLHELI_32 4-in-1 30X30 ESC
• 8 x Silicon grommets M4 to M3
• 2 x JST-SH1.0_8pin cable, 4cm
• 1 x JST-GH-6P cable for DJI port, 10cm