RVS Creamer 2 - 5"/5.5" Freestyle Frame

The Creamer is back and better then ever! Dialed in and smooth freestyle flight (aka creamy) is what we’re all after… this is where the Creamer2 shines! Designed to shed excess weight and bulk but yet be robust enough for the abuse we all put our freestyle frames through. The dual stack mounts allow a versatile and clean build, as do the buzzer and RX pockets in the baseplate.

IMPORTANT TO NOTE

• For GoPro Mounts all Yeet Frame mounts are compatible.
• DJI O4 Pro conversion kit now available - RVS Smolyeet & Creamer 2 DJI O4 Pro Kit

FEATURES

• RVS Honeymoon Warranty
• The easiest frame to tune! True-X layout and ultra rigid design make it fly amazing with very little effort.
• DJI O3 (see details below) & Caddx Vista Ready for that DJI HD goodness
• DJI cam to Micro cam ready (19mm width)
• Chamfered edges for days!
• Dual Stack setup
  • 30.5mm (single)
  • 20x20mm (front & rear)
  • AIO Mounting (single)
• Rigid true-X air-frame
• Extra carbon rails at the front allow it shake off the gnarliest of crashes. 
• Light weight
• Super Low Profile / Low CG
• Dual top mount battery straps (cause I hate loosing lipos!)
• Removable easy swap arms - remove 1 bolt, loosen 1 bolt
• Bling bling gold-coloured hardware
• XT60 passthrough in the top plate

SPECIFICATIONS

• Wheelbase: 5-5.5": 252mm
• Carbon Fiber Thickness:
• Base: 2.5m
• Mid-plate: 2.5mm
• Top-plate: 2.5mm
• Arms: 5mm
• Camera Skirt: 5mm
• Weight: 114.5g (this includes the TPU parts)
• Prop size: 5-5.5"
• Motor Mount Pattern: 16x16mm M3

RECOMMENDED COMPONENTS

• Motors: 22xx-23xx (RCINPower Wasps make an excellent combo!)
• ESCs:
• 40A-65A 20x20 or 30x30mm
• If using an AIO, use a something rated for at least 45A and use light motors.
• Battery:
• 4S 1300-1550mAh
• 6S 1000-1350mAh
• Props: 5" to 5.5" (Gemfan 51433, Gemfan 5226 & Ethix line are all excellent choices)
• Camera: Micro Size or DJI Camera
• DJI O3 - add M1.6x8mm Cap Head Screw for Vista/O3 (8pcs) and RVS Direct Antenna Mount (23mm version) to use the O3 with this frame. Props will be in view however. 

PARTS

• Arms - click here
• Top Plate - click here
• Mid-plate with pressnuts - click here
• Bottom brace - click here
• TPU Go Pro Session Mount - click here
• TPU Go Pro Hero5/6/7 Mount - click here
• TPU Go Pro Hero8 Mount - click here
• TPU Go Pro Hero9 Mount - click here
• TPU Adjustable Mount - click here
• Arm Guards - click here

3D Parts on Thingiverse

• https://www.thingiverse.com/rotorvillage/designs

More info and a great little community over at the RVS Owners Group Facebook page - facebook.com/groups/rvs.og

PACKAGE CONTENTS

• 1 x RVS Creamer2 frame kit w/ hardware
• 16 x Motor Mount Screws
• 2 x LiPo straps
• 1 x TPU Mount kit (FPV cam mounts x2, Immortal-T Mount, SMA antenna mount)

RVS Honeymoon Warranty

Break any part of the frame (carbon fibre and hardware) within the first month of purchase and it's covered on us! Just send us a picture of the broken part, along with your order number. Replacement parts can be added to future orders for free, or you can pay for shipping ($3 for snailmail).