RVS Creamer 2 Bando Edition

The Bando Edition is here!!! Beefy 6mm arms with ample motor protection!

IMPORTANT TO NOTE

• For GoPro Mounts all Yeet Frame mounts are compatible.

FEATURES

• The easiest frame to tune! True-X layout and ultra rigid design make it fly amazing with very little effort.
• DJI O3 (see details below) & Caddx Vista Ready for that DJI HD goodness
• DJI cam to Micro cam ready (19mm width)
• Chamfered edges for days!
• Dual Stack setup
  • 30.5mm (single)
  • 20x20mm (front & rear)
  • AIO Mounting (single)
• Rigid true-X air-frame
• Extra carbon rails at the front allow it shake off the gnarliest of crashes. 
• Light weight
• Super Low Profile / Low CG
• Dual top mount battery straps (cause I hate loosing lipos!)
• Removable easy swap arms - remove 1 bolt, loosen 1 bolt
• Bling bling gold-coloured hardware
• XT60 passthrough in the top plate

SPECIFICATIONS

• Wheelbase: 5-5.5": 252mm
• Carbon Fiber Thickness:
• Base: 2.5m
• Mid-plate: 2.5mm
• Top-plate: 2.5mm
• Arms: 6mm
• Camera Skirt: 5mm
• Weight: 144g
• Prop size: 5-5.5"
• Motor Mount Pattern: 16x16mm M3

RECOMMENDED COMPONENTS

• Motors: 22xx-23xx (RCINPower Wasps make an excellent combo!)
• ESCs:
• 40A-65A 20x20 or 30x30mm
• If using an AIO, use a something rated for at least 45A and use light motors.
• Battery:
• 4S 1300-1550mAh
• 6S 1000-1350mAh
• Props: 5" to 5.5" (Gemfan 51433, Gemfan 5226 & Ethix line are all excellent choices)
• Camera: Micro Size or DJI Camera
• DJI O3 - add M1.6x8mm Cap Head Screw for Vista/O3 (8pcs) and RVS Direct Antenna Mount (23mm version) to use the O3 with this frame. Props will be in view however. 

PARTS

• Bando Arms - RVS Creamer 2 Bando Arm (1pc)
• Top Plate - click here
• Mid-plate with pressnuts - click here
• Bottom brace - click here
• TPU Go Pro Session Mount - click here
• TPU Go Pro Hero5/6/7 Mount - click here
• TPU Go Pro Hero8 Mount - click here
• TPU Go Pro Hero9 Mount - click here
• TPU Adjustable Mount - click here
• Arm Guards - click here

3D Parts on Thingiverse

• https://www.thingiverse.com/rotorvillage/designs

More info and a great little community over at the RVS Owners Group Facebook page - facebook.com/groups/rvs.og

PACKAGE CONTENTS

• 1 x RVS Creamer2 frame kit w/ hardware
• 16 x Motor Mount Screws
• 2 x LiPo straps
• 1 x TPU Mount kit (FPV cam mounts x2, Immortal-T Mount, SMA antenna mount)