Specifications

• Frame: NewBeeDrone Cockroach 65mm Brushless LiteAF Racing Frame Black
• Flight Controller: Hummingbird v3.1 RaceSpec ELRS 
• Motors: Hummingbird 0702 RaceSpec true 3000kv Motor
• Propellers: Azi (Tri Blade) Micro Propellers 31mm - 1.0mm Shaft
• Camera: BeeEye Camera RaceSpec with short wire
• Camera Mount: Hummingbird RaceSpec Cam mount. TPU 3D Printed Version
• VTX Antenna: 5.8g RaceSpec Antenna 
• Power Connector: GNB A30 Compatible with BT2.0

Flight Controller Specifications

• MCU: STM32F411
• GYRO：BMI270
• VTX: True 25mw 5.8g Analog VTX
• ESC: 12A pre-flashed with Bluejay 0.19.2 O-H-5 48kHz
• ESC Connector: direct solder Pad Recommend Whoop RaceWire
• OSD: NBD7456 graphical OSD compatible with Betaflight OSD Perfect Edition
• Receiver: SPI ExpressLRS 2.4G with solder on Enameled wire 31mm as antenna
• Flight Controller Weight: 4.71g (Include antennas and battery connector) 
• Flight Controller Size: Outer dimensions: 29x29x7.6mm
• Flight Controller Holes: 25.5x25.5mm
• Battery input: 1S Only
• Uart1:free
• Uart2:free
• Power Plug:  GNB A30 Connector compatible with BT2.0

SPI ELRS3.0 receiver (Binding instruction: power on the drone, push the bind button under the flight controller to get into bind mode. If your remote control is not ELRS3.0 or above version. You will need to update your remote controller ELRS to 3.0 version because Betaflight 4.4 will no longer support any lower version of 3.0)

Important Notice for Customers:

The Hummingbird V3.1 RaceSpec BNF Drone is specifically designed for professional FPV racers with advanced skills and technical knowledge. This drone operates like a high-performance race car, built for extreme speed and agility, and requires a pilot who can handle the power and complexity. It is not intended for beginners or casual users. Think of it as the difference between driving a race car versus a standard vehicle—this drone demands experience and expertise to operate safely and effectively.

Please note, physical crash damage is not covered under warranty. The warranty is limited to DOA (Dead on Arrival) units only. To qualify for a warranty claim, the drone must be in good condition, with no physical damage, scratches, missing components, or modifications. Any crashes, improper handling, or modifications void the warranty.

For those who are new to FPV racing, we recommend the Hummingbird V3.1 Standard Version. This version is designed with beginners in mind, offering a more durable frame and easier reparability, making it better suited for pilots learning the ropes.

Important Notice: If you experience issues with your drone, do not flash the firmware. Simply perform a factory reset using the configuration tool (e.g., Betaflight Configurator) and then do an accelerometer calibration. For further assistance, please contact our support team.