NeutronRC Mini F435 5in1 AIO ELRS 400mW VTX 2-3S 20A
Compatible with Betaflight 4.5 or newer!
Only purchase this product if you are comfortable with flashing firmware and general electronics as this is aimed more at developers, as we can only offer very limited software level support, any technical queries will need to be directed to the manufacturer.
- PCB size: 31.5*31.5*8MM (including USB)
- Installation hole: 25.5*25.5MM
- Weight: bare board 6.4 grams
- Suggested frame: 65MM-3 inch
- default ERLS firmware name is: EMAX2.4GHz;
- Default ELRS version; version 3.2.1;
- Password:neutronrc
VTX Transmission form download:
https://drive.google.com/file/d/1tC1VnjAIuZ9Dwe2rV_bF6MbrKGa7Cf37/view?usp=sharing
If this is your first time coming into contact with the AT32 series of domestic flight controllers, please install the following drivers first:
Connect to betaflight configurator's COM driver:
https://drive.google.com/file/d/1edIEESK6lgo2lHQYzjq8ywgLZRgKMNnj/view?usp=sharing
Update firmware DFU driver:
https://drive.google.com/file/d/1KY2xKEmKlPVwNKdak0vA7J8ByE1K6KTw/view?usp=sharing
About motor compatibility issue under 1S. If you are using a 11XX or larger motor, it can be driven perfectly regardless of whether it is 1S or 2S.
If you use 07XX, 08XX 10XX motors in 1S, the current ESC program recommends using RC inpower, Emax, weBLEEDfpv brand motors. Some motors of other brands have poor test compatibility.
Please note that you won’t typically need to flash FC and ESC firmware – simply install and set the related options according to your settings. Also, our default firmware is based on the 4.3.2 branch.
Package Contents
- 1x NeutronRC Mini AIO Flight Controller
- Mounting:
- AIO
- CPU:
- AT32
- Amps:
- 20
2 Reviews Hide Reviews Show Reviews
-
Seems to work OK Betaflight but as of Oct 8 2024 not Inav
Flashed Betaflight all seems to work OK. Flashed newest Inav and the onboard receiver will not give stick commands. After trying many different things. I found out there is a problem with the pin configuration to UART 3.. Developers are aware and Bugs are being worked on. The receiver will bind to transmitter but no stick inputs. If you compare CLI resource in Betaflight and Inav you can see the pin configuration problem. Since it is hardwired on the board it needs a software fix.
-
Great value. DO NOT like
Great value. DO NOT like usb connector facing up from surface. It would not be accessible when board was installed. I had to add a remote connector and likely killed the Transceiver in the process. Soldering to the very small pads a challenge. I will add a receiver as every thing else seems ok.
