null

Li-ion Charger PCB BMS Protection Board - 4S 30A

SKU:
LIBMS002
$6.99

Li-ion Charger PCB BMS Protection Board - 4S 30A 

Disclaimer: Working with LI-ION Batteries is Dangerous and should only be performed by an expert, Use at your own Risk.

Features

  •  high-accuracy voltage detection circuit;
  •  terminal of the charger using high voltage device;
  •  Built-in three-stage over-current detection circuit (over-current 1, over-current 2, load short circuit);
  •  MOS transistor can control the battery charge and discharge;

 Specifications

  • overcharge detection voltage :4.25±0.025V 
  • overcharge Lift the voltage:4.15±0.05V
  • over discharge detection voltage :2.50±0.08V
  • over discharge Lift the voltage:3.00±0.1V
  • overcurrent current:20-30A
  • working current:15A(Natural cooling 10.A, add heat sink 15A, the maximum instantaneous current 30A
  • Remove protection condition automatic recovery, without activation
  • Protections:
  • Short circuit protection
  • Overcharge protection
  • Over-discharge protection
  • Overcurrent protection
  • operating temperature:-40-85
  • Size:50*22*4mm

 Package contents

  • 1 x Charger Module

 

Width:
12.00 (cm)
Height:
3.00 (cm)
Depth:
8.00 (cm)