Happymodel Mobula7 O4 Wide 2S ELRS Whoop - XT30

*May differ from pictures shown.

** Updated model with O4 Wide

Latest version of Mobula7 digital HD is Mobula7 O4 wide that comes with new DJI O4 Wide system which providing Ultra-wide field of view for immersive FPV experience. And the new Happymodel RS1102 KV10000 motor with HQPROP 45mm propellers, bring a powerful and smooth flying experience. This would be a good option for indoor and backyard FPV flying. 

Features:

• Equipped with the latest DJI O4 Wide system
• Lightweight 45mm HD Whoop Design
• 2S battery support Powerful and Smooth freestyle flying
• UART ExpressLRS receiver support stable control link
• DJI Radio controller support(Need to flash Betaflight firmware)
• Lighter and small for indoor FPV

Drone Specs
Wheelbase: 80mm
Size: 107mm*107mm*58mm
Weight: 45g

Specifications

Motor

• Model: RS1102 KV10000
• Configu-ration: 9N12P
• Stator Diamter: 11mm
• Stator Length: 2mm
• Shaft Diameter: Φ1.5mm
• Motor Dimension(Dia.*Len): Φ13.5mm*14mm
• Weight(g): 2.8g
• No.of Cells(Lipo): 1-2S

Propellers:

• Weight: 0.25g
• Material: Poly Carbonate
• Pitch: 0.9
• Props Dia: 45mm
• Hub Thickness: 5mm
• Shaft: 1.5mm

Flight controller:

• MCU: STM32F405RGT6 (168MHZ, 1Mbyte FLASH)
• GYRO Sensor: BMI270  (SPI connection)
• Mount hole size: 25.5mm*25.5mm
• Power supply: 1-2S battery input (DC 2.9V-8.7V)
• Built-in 12A(each) Blheli_S 4in1 ESC
• Built-in Serial ExpressLRS 2.4G
• Built-in BMP280 Barometer
• Built-in 8MB blackbox
• Built-in voltage meter sensor , voltage meter scale 110
• Built-in current meter sensor , current meter scale 470

Onboard 4in1 ESC:

• Power supply: 1-2S LiPo/LiPo HV
• Current: 12A continuous peak 15A (3 seconds)
• Support BLHeli_S Bluejay firmware
• Factory firmware: Bluejay ESC V0.19
• Firmware target: Z-H-30
• Default protocol: DSHOT300
• When use 1s battery and high KV 0702/0802 motors, should set startup power to 1100/1200

Onboard UART ExpressLRS 2.4GHz Receiver:

• Packet Rate option: 25Hz/50Hz/150Hz/250Hz/500Hz
• RF Frequency: 2.4GHz
• Antenna: enameled copper wire 31mm length
• Telemetry output Power: <12dBm
• Default firmware version: ExpressLRS V3.0.1
• Firmware target: HappyModel EP 2400 RX
• Could update firmware via ExpressLRS configurator

DJI O4 Wide Air Unit:

• Weight:
  Air Unit (camera module included): Approx. 13.3 g
• Transmission Module: 30×30×6 mm (L×W×H)
• Camera Module: 20.5×14×20.5 mm (L×W×H)
• Camera Cable Length: 50mm
• Coaxial Cable: 50 mm
• 3-in-1 Cable: 50 mm
• Operating Frequency:
  5.170-5.250 GHz
  5.725-5.850 GHz
• Operating frequency varies by region. Refer to local regulations.
  Transmitter Power (EIRP):
  5.1 GHz: <23 dBm (CE)
  5.8 GHz:
  <30 dBm (FCC)
  <14 dBm (CE)
  <30 dBm (SRRC)
• Live View Quality: 1080p at 30/50/60/100fps

***If you want to use DJI FPV Remote controller, please change betaflight settings like following picture, no need do any hardware modification to the flight controller:

Package Contents

• 1 x Happymodel M80 Frame
• 1 x CrazyF405HD ELRS flight controller firmware target:BETAFLIGHTF4
• 4 x RS1102 KV10000 brushless motor
• 1 x HQPROP 45MMX2 bi-blade propellers(4cw+4ccw)
• 1 x DJI O4 Wide Air unit
• 1 x Canopy
• 1 x Screw driver