Happymodel Mobula6 FREESTYLE HDZero ELRS 1S Whoop
*May differ from pictures shown.
Happymodel Mobula6 Freestyle BNF is a 65nm low light BNF using the HDZero AIO5 designed for freestyle whooping. It is under 20grams..
Compatible Batteries
Features
- Equipped with the lightest brushless motors - SE0702, only 1.49 grams
- AIO Flight controller with Serial ELRS Receiver
- Onboard black box read
- Smooth and powerful
- HDZero HD VTX
Specifications
- Recommended Battery: 1S 300mAh with A30 or BT2.0 plug
- Propeller Size: 31mm
- Weight: 19.6g
AIO
- MCU: STM32F411 (100MHz, 512K Flash)
- Gyro: BMI270
- On board voltage and amperage meters
- Built-in 5A(each) BLHeli_S 4-in-1 ESC
- Bluejay ESC firmware pre-installed
- Built-in 5.8G HDZero VTX
- Built-in SPI ExpressLRS 2.4GHz receiver compatible with expresslrs v3.0
- Built-in 5V 1A BEC
- Board size:28.5x28.5mm with a 25.5x25.5 mounting hole size
- Betaflight firmware: CRAZYBEEF4SX1280 4.4.2 out of factory
MOTORS
- Motor Dimension(Dia. x Len): Φ9.5mm x 14mm
- Model: SE0702 KV28000
- No.of Cells(Lipo): 1S only
- Shaft Diameter: Φ1mm
- Configu-ration: 9N12P
- Stator Diamter: 7mm
- Stator Length: 2mm
- Weight(g): 1.5g
HDZero ECO Camera
- Sensor size: 1/2 inch
- Resolution: 720p60 4:3 and 16:9
- FOV: D:155° H:126° V:94°(4:3)
- FOV: D:145° H:126° V:70°(16:9)
- WDR
Package Contents
- 1x Happymodel Mobula6 Whoop HD/ w HDZero LUX - ELRS 2.4GHz - Freestyle
- 1x Spare Canopy
- 1x Spare Propellers (Set)
- 1x Screw driver
- 1x Propeller Removal Tool
- Receiver Type:
- ExpressLRS
