null
HappyModel 1S Moblite7 HDZero V3 Whoop - ELRS

HappyModel 1S Moblite7 HDZero V3 Whoop - ELRS

$200.65
SKU:
HM-T2

HappyModel 1S Moblite7 HDZero V3 Whoop - ELRS

*May differ from pictures shown. 

Happymodel Moblite7 HD Zero is a built small 75mm whoop designed for indoor flying. Even at this size, the drone will offer digital HD video transmission through the HD Zero system.

The basis of the drone is a SuperX HD AIO board with an integrated UART ELRS receiver. However, the board has UART pins brought out so that another external receiver can be connected. 1002 20000Kv motors are used, which are among the larger and more powerful in the 75mm Whoop category. The motors drive small Gemfan 1610-2 propellers. High quality video is provided by the aforementioned HD transmission HD Zero. The drone is powered by a 1S battery with A30 connector (not included). The recommended battery capacity is 450-550mAh. Everything is held together by the Moblite7 V4 durable plastic frame. The drone without battery weighs only 29.5 grams, so flying it is perfectly safe.

Features

  • Diagonal distance of motors: 75mm
  • Weight: 29.5g (without battery)
  • Size: 98x98x48mm
  • Receiver: Integrated UART ELRS 2.4GHz
  • Recommended battery: 1S 450-550mAh
  • Connector: A30
  • Motors: EX1002 20000Kv
  • AIO Board: SuperX HD ELRS 12A
  • VTX: HD Zero Whoop Lite VTX
  • Camera: HD Zero Nano Lite

MOTOR SPECIFICATIONS

  • Model: EX1002 20000KV
  • Configuration: 9N12P
  • Stator Diameter: 10mm
  • Stator Length: 2mm
  • Shaft Diameter: Φ1.5mm
  • Motor Dimension(Dia.*Len): Φ13.5mm*12.5mm
  • Weight(g): 2.5g
  • No. of Cells(Lipo): 1S only

GEMFAN 1610-2 PROPELLER SPECIFICATIONS

  • Weight: 0.24g
  • Material: PC
  • Pitch: 1 inch
  • Props Dia: 40mm
  • Center Hole Dia: 1.5mm

HDZERO NANO LITE CAMERA SPECIFICATIONS

  • Dimensions: 14x16x11 mm
  • Weight: 1.5gram
  • Sensor: 0.5 inch, up to 10650 mV/Lux-sec ultra-high sensitive CMos sensor
  • Excellent low light performance
  • FOV:
    4:3: D:130° H:108° v:84°
    16:9:D:122° H:108° V:65°

HDZERO WHOOP LITE VTX SPECIFICATIONS

  • 1S Input
  • 25mW/200mW RF Output-SmartAudio Support
  • 25.5×25.5 M2 Soft Mounting- Antenna Retention
  • Removable Shielding Box- 32.5×32.5mm(29x29mm inner)
  • 4.5grams/4mm Thickness (without shielding)

PACKAGE Contents

  • 1 x Happymodel Moblite7 HDZero 1S 75mm Brushless HD FPV Whoop Drone
  • 1 x Moblite7 Spare Canopy
  • 1 x Gemfan 1610 propeller Set (4cw+4ccw)
  • 1 x Propeller disassemble tool
  • 1 x Screwdriver
Width:
23.00 (cm)
Height:
15.00 (cm)
Depth:
8.00 (cm)
Receiver Type:
ExpressLRS