In the GEPRC family, we have welcomed a new member: Tern-LR40. This is a 4-inch long range FPV with excellent performance and reliability. It adopts a DC-type structure. Its careful lightweight design uses aviation-grade 7075 aluminum parts. Light and rigid.

Equipped with Taker G4 45A AIO flight control, which has higher computing power redundancy. The use of a top-mounted fixed GPS can avoid the impact of its own electromagnetic interference on flight, and the rescue function is more stable.

The Tern-LR40 is like a bird with spread wings, flying freely through the blue sky without being restrained. Choosing it is not only a high-quality flight, but also an artistic journey.

Features

• New lightweight design, weight under 249g.
• Expand interference GPS fixation method and stay away from interference sources
• DC structure cannot see the propellers during flight, which is more suitable for straight-line aerial photography.
• Install BB ring to set the battery low voltage alarm
• Using GEP-M10nano GPS, the satellite search speed is faster and the rescue mode is more stable.
• Compatible gopro mount installation, expandable shooting creation.

Specifications

• Model: Tern-LR40
• Frame: Tern-LR40 Frame
• Top Plate: 1.5mm
• Middle Plate: 2.0mm
• Bottom Plate: 1.5mm
• Arm Thickness: 3.5mm
• Flight Controller (FC): Taker G4 45A AIO
• Microcontroller Unit (MCU): STM32G473CEU6
• Gyroscope: ICM 42688-P
• On-Screen Display (OSD): Betaflight OSD w/AT7456E
• Electronic Speed Controller (ESC): 32Bit 45A
• Video Transmitter (VTX): RAD mini
• Camera: Caddx Ratel2
• Antenna: GEPRC Peano 5.8G RHCP UFL
• Connector: XT30
• Motors: GEP-SPEEDX2 1404 3000KV
• Propellers: HQProp T4X2.5Grey (2CW+2CCW)
• Weight Tern-LR40 Analog ELRS24 Version: 159g±5g
• Receiver: PNP
• Recommended Battery: LiPo 4S 660mAh-850mAh/18650 3000mAh
• Flight Time: 10-25 minutes

Package Contents

• 1 x Tern-LR40
• 2 x HQProp T4X2.5Grey (2CW+2CCW)
• 2 x battery anti-slip mat
• 1 x screw pack
• 4 x  Battery strap M15*170mm
• 1 x L-shaped screwdriver 1.5mm
• 1 x  GoPro camera mount holder
• 1 x T-type Antenna mount
• 1 x RC Printed parts