null

GEPRC RAD Mini 1W VTX

$53.99
SKU:
GP-D1

GEPRC RAD MINI 1W 5.8GHz VTX - 20x20

RAD MINI VTX is the latest 1W high-power VTX developed by GEPRC. It has 4 adjustable power levels and a maximum power of 1000mW, with a stable transmission signal, suitable for short and medium-range flight to ensure image transmission quality.

RAD MINI adopts 6061 high-strength aluminum alloy housing to assist in heat dissipation, which has stronger impact resistance and better heat dissipation.

IRC Tramp protocol, OSD settings adjustment, built-in microphone can provide a real-time sound transmission.

7-28V wide voltage input, with temperature control protection function to prevent overheating and burnout.

With 20x20mm PCB mounting hole, the diameter of single hole is 3.05mm. The aluminum alloy housing can be removed and installed as a stack.

Cover the housing with a 20X20 mounting hole and a single hole with M2 thread. It is recommended to be installed at the rear of the frame where there are 20X20 holes. Pay attention to insulation when installing, the PCB side down, and pad with four nylon spacers for installation. (included in the package)

Specifications

  • Model: GEPRC RAD MINI 5.8G 1W VTX
  • Input voltage: DC7-28V(2-6S Battery)
  • Output voltage: 5V@600mA(power 5V to Camera)
  • Input impedance: 75Ω
  • Protocol: IRC Tramp
  • Antenna connector: MMCX
  • Cable connector: SH1.0 5pin+SH1.0 3pin
  • Output power: 25mW/200mW/500mW/1000mW/PIT MODE
  • Frequency band: Universal frequency band(40CH),American FCC frequency band(37CH),European EU frequency band(26CH)
  • Video format: PAL/NTSC
  • Microphone: Built in microphone
  • Mounting hole: 20x20mm
  • Size: 30.83×30.83mm
  • Net weight: 4.7g
  • With metal housing: 8.4g

Package Contents

  • 1x GEPRC RAD MINI 5.8G 1W VTX
  • 1x Copper tube antenna MMCX 80mm
  • 1x MMCX to SMA(Internal foramen)connector
  • 1x SH.0 5pin VTX cable(100MM)
  • 1x SH1.0 to SH1.25 camera cable(65MM)
  • 1x Set of screws

FPV Notice
The use and operation of this type of product in Canada may require a license. It is your responsibility to ensure that the use of this product meets the requirements imposed by Canada's government rules and regulations for RF devices. Rotor Village will not be held responsible for your actions in the event of a violation of the Canadian governments regulations. By purchasing this product, you are agreeing to have read and to understand this notice.
Width:
2.00 (cm)
Height:
2.00 (cm)
Depth:
0.20 (cm)
mW:
1000