GEPRC MARK5 O4 Wide X - ELRS

GEPRC MARK5 O4 Wide X - ELRS

GEPRC

$549.66

Only 2 left

SKU: GP-K4

1 review Write a review
SKU:
GP-K4
Adding to cart… The item has been added

You might also like

GEPRC MARK5 O4 Wide X - ELRS

*Product may vary from pics. 

The GEPRC team developed the MARK5 O4 Pro series specifically for the DJI O4 Air Unit Pro VTX. With its 1/1.3-inch image sensor, the O4 Air Unit Pro takes digital HD video quality to the next level, offering enhanced low-light performance and sharper visuals. It supports up to 4K 120fps recording, with real-time transmission reaching 1080P 100fps.
The MARK5 O4 Pro features a newly designed aluminum camera mount and molded silicone damping to minimize vibrations and reduce resonance for the O4 Pro camera.
Powered by the TAKER F722 BT 32Bit 50A stack and 2107.5 1960KV motors, it delivers smooth, responsive flight and ultra-stable footage.

Features

  • Equipped with DJI O4 Air Unit Pro for clear, reliable video transmission.
  • DC and wide-X frame options for different flying needs.
  • Paired TAKER F722 BT 32Bit 50A stack with 2107.5 1960KV motors delivers ample power.
  • Bluetooth tuning via mobile app makes adjustments effortless.
  • Quick-release arms with two-screw swap for easy maintenance.
  • Aluminum camera mount with silicone damping reduces vibration and resonance for the O4 Pro camera.
  • Dedicated compartment for the capacitor and buzzer ensures a stable, jitter-free operation.
  • Optimized frame damping reduces vibration, keeping electronics running smoothly.

Specifications

Wide X Version 

  • Model: MARK5 O4 Pro Wide X FPV
  • Wheelbase: 225mm
  • VTX: DJI O4 Air Unit Pro VTX module
  • Camera: DJI O4 Air Unit Pro camera module
  • Antenna: DJI O4 Air Unit Pro Antenna
  • Motor: SPEEDX2 2107.5 1960KV
  • Prop: Gemfan 5136
  • FC: GEP-F722-BT-HD V3
  • MCU: STM32F722
  • IMU: ICM42688-P(SPI)
  • OSD: BetaFlight OSD w / AT7456E chip
  • ESC: GEP-BL32 50A 96K 4IN1 ESC
  • Power Connector: XT60H-M
  • Receiver: ELRS 2.4G
  • Recommended Battery: LiPo 6S 1050mAh-1550mAh
  • Printouts Color: emerald green
  • Weight: 414g ± 5g
  • Flight Time: 6-8 minutes（Based on slow cruising tests, the actual may vary due to product differences, firmware version, flying style, and environment. For reference only）

Package Contents

  • 1 x GEPRC MARK5 O4 Pro FPV
  • 1 x Gemfan 5136（2CW 2CCW）
  • 1 x 15*250mm strap
  • 2 x 20*250mm straps
  • 2 x Battery anti-slip pads
  • 1 x 3D printouts pack
  • 1 x Spare screw pack
  • 1 x L-shaped screwdriver 1.5mm
  • 1 x L-shaped screwdriver 2mm
  • 1 x L-shaped screwdriver 3mm
  • 1 x M8 wrench
 
Spare Screws Included:
  • 1 x M5 Flange Nylon Knurled Nut
  • 2 x M2 Stainless Steel Press-fit Nuts
  • 1 x M5*25 Stainless Steel Button Head Hex Screw
  • 4 x M3*10 Button Head Hex Screws
  • 4 x M3*8 Button Head Hex Screws
  • 2 x M3*8 Countersunk Hex Screws
  • 2 x M3*5 Countersunk Hex Screws
Receiver Type:
ExpressLRS

1 Review Hide Reviews Show Reviews

  • 5
    GEPRC MARK5 O4 Wide X - ELRS

    Posted by Brent S. on 2025 Aug 26th

    This is my first Free Style FPV drone. First drone that uses the RadioMaster ELRS Boxer and first time using BetaFlight. Good thing the GEPRC MARK5 O4 Wide X - ELRS was built tough. I probably made every mistake you could with the combination I use and she is still flying with only a set of props replaced. Two things I would like to see improved, especially if this is your first FPV drone is the Manual. The second thing, left hand threads on the motors that spin counter clockwise.

Related Products

!