GEPRC CineLog35 V2 PNP FPV Drone - DJI O3
*Pictures may vary from what is shown. Available in various options - Analog, DJI FPV & Avatar FPV.
The CineLog 35 V2 features a DJI O3 VTX, main carbon plate, and injection protection frame with an increased 7075 aluminum column for structural strengthening. The battery mounting uses a tie with 7075 aluminum parts fixed, and the power XT60E1-M plug is integrated with the carbon plate for convenient application. The protective frame for O3 Air Unit adds a memory card and USB port for easy data reading. Equipped with F722-45A AIO and the new SPEEDX2 2105.5 motor, this drone has more power with an aggressive system and faster response. This is a 3.5-inch HD FPV cinematic FPV drone that integrates cinematic, freestyle, leisure, and safety to meet the user’s requirements for flying and filming various scenes indoors and outdoors.
Features
- Strengthened carbon plate, hollow design, injection protection frame, and noise reduction design
- Propeller Guard adds memory card and USB ports to O3 Air Unit for easy data reading
- O3 camera is designed with an independent under-hanging shock absorption gimbal
- GEP F722-45A AIO V2 high-performance flight controller
- SPEEDX2 2105.5 motors with HQ DT90 propellers
- Carefully tuned 3.5-inch HD cinematic FPV drone
- 7075 aluminum parts are fixed, solid and stable
- XT60E1-M Power Cable
Specifications
- Receiver: PNP, GEPRC ELRS 2.4G, TBS Nano RX
- CineLog35 V2 HD O3 TBSNanoRX weight: 285.8g
- Motor: SPEEDX2 2105.5-2150KV(6S)
- OSD: Betaflight OSD w/AT7456E chip
- FC system: GEP-F722-45A AIO V2
- Propeller: HQProp D-T90MM
- Model: Cinelog35 V2 HD O3
- MCU: STM32F722RET6
- Flight time: 5′00″ -8′ 30″
- Frame: GEP-CL35 V2
- Wheelbase: 142mm
- Gimbal plate: 2.0mm
- Bottom plate: 1.5mm
- Antenna: 5.8G&2.4G
- Gyro: ICM 42688-P
- Top plate: 3.5mm
- VTX: O3 Air Unit
- ESC: 8Bit 45A
- Camera: O3
- GPS: None
Recommended (Not Included)
- XT-60 Batteries: 1050mah-1300mah
Package Contents
- 1x GEPRC CineLog 35 V2 3.5" HD Cinewhoop Drone w/ DJI O3 - 6S (Choose Receiver)
- 1x L-shaped screwdriver (1.5mm)
- 1x Naked GoPro Mounting Base
- 1x L-shaped screwdriver (2mm)
- 1x L-shaped screwdriver (3mm)
- 2x HQProp D-T90MM(2 pairs)
- 2x M20*250mm battery strap
- 1x Antenna fixed tube (pair)
- 1x Antenna Mounting Base
- 1x GoPro Mounting Base
- 2x Battery Silicone Pads
- 1x Plastic Tweezers
- 1x Hardware Set
- 1x M5 wrench
- 1x Keychain