FlyWoo GM10 Nano V3.1 GPS Module
GOKU GM10 V3.1 GPS series is here! Using the latest M10050 GNSS chip. Compared with the previous generation GM8 V2, the positioning is more accurate, and the speed of star search is faster.
Need help with setup? Follow this simple tutorial by Oscar Liang - https://oscarliang.com/gps-mini-quad/
Note: The chip of GOKU GM10 V3 GPS is M1005. Only BF4.3x version firmware can use Ublox protocol. BF4.2x and earlier firmware can only use NMEA protocol But there is no difference in performance between the two protocols.
FEATURES
- GPS Module
- Three Module
- 4pin Pad
- Ultra light weight
Specifications
- Chipset : M10050(Tenth Generation Chip)
-
Receiving Format : GPS,GLONASS,Galileo,BeiDou,QZSS and SBAS
-
Default Protocol : GPS,Galileo,BeiDou
-
Frequency : GPS L1,GLONASS L1,BeiDou B1,SBAS L1,Galileo E1
-
Channels : 72 Searching Channel
- Tracking : -162dBm
- Reacquisition : -160dBm
- Support Rate : 4800bps to 921600bps,Default 115200bps
- Data Level : TTL or RS-232,Default TTL level
- Data Protocol : BF4.3.X(UBLOX)/BF4.2.X(NMEA)
- Output frequency : 1Hz-10Hz，Default 10Hz
- Altitude : 50,000m Max
- Velocity : 500m/s Max
- Acceleration : Less than 4g
- VCC : DC Voltage ：3.3-5V
- Operating temp : -40 °C ~ +85°C
- Storage Temp : -40°C ~ +105°C
- Indicator :
- PPS LED:yellow .PPS LED not bright when GPS not fixed, flashing when fixed
- The Module’s Pins: RX TX 3.3-5V GND
PACKAGE CONTENTS
- 1x Flywoo GOKU GM10 Nano V3 GPS Module
- 1x 100mm Cable
- 1x Copper Foil
4 Reviews Hide Reviews Show Reviews
-
Nice gps
god deal
-
Slow to get sats only
Slow to get sats only get 8 Might be my placement but my foxeer got 20+ in 1 minute !!
-
Saves weight and works as well as a larger M10
A must have for those light weight RC's!
-
Perfect little GPS
Small but powerful GPS.
