FLYCOLOR TRINX G20 60A ESC (3-6S)

FEATURES

• ARM 32-bit Cortex MCU STM32G0, frequency up to 64 MHz.
• PWM frequency up to 128K, high frequency for higher throttle makes
• running smoother.
• Compared with the previous generation of ESC, the ESC firmware is
• optimized, makes the throttle linearity smoother and the response faster.
• Miniaturized and lightweight design, better routing and component layout.
• 20x20 mounting holes to meet the installation requirements of diversified
• frames.
• Built-in current sensor and VBAT output.
• Supports regular 1-2ms pulse width input, as well as Oneshot125
• (125-250us), Oneshot42 (41.7-83.3us) and Multishot (5- 25us). The input
• signal is automatically detected by the ESC upon power up.
• All Dshot and Proshot signals are supported .
• Damped light does regenerative braking, causing very fast motor
• retardation, and inherently also does active freewheeling.
• Supports higher power load, more suitable for violent flight of racing drone.

TECH DATA

• Model: Flycolor TRINX G20
• Con. Current: 60A
• Burst Current: 70A (10s)
• BEC: No BEC
• LiPo cells: 3-6S
• Weight: 14.8g
• Size: 45x41x8.3mm
• Mounting: 20x20mm,M3
• Configurator: BLHeliSuite32 
• Firmware：Flycolor_Raptor_5
• Application: 170-450 Multi

Package Contents

• TRINX G20 4in1 x1
• Silicone vibration absorber x4
• O-Ring x5
• Power cable+XT60 x1
• FC/ESC connecting wire x1
• Low ESR capacitor x1
• Aluminum heat sink x1