FlyColor TRINX G20 60A ESC
SKU:
FR-C1
FEATURES
- ARM 32-bit Cortex MCU STM32G0, frequency up to 64 MHz.
- PWM frequency up to 128K, high frequency for higher throttle makes
- running smoother.
- Compared with the previous generation of ESC, the ESC firmware is
- optimized, makes the throttle linearity smoother and the response faster.
- Miniaturized and lightweight design, better routing and component layout.
- 20x20 mounting holes to meet the installation requirements of diversified
- frames.
- Built-in current sensor and VBAT output.
- Supports regular 1-2ms pulse width input, as well as Oneshot125
- (125-250us), Oneshot42 (41.7-83.3us) and Multishot (5- 25us). The input
- signal is automatically detected by the ESC upon power up.
- All Dshot and Proshot signals are supported .
- Damped light does regenerative braking, causing very fast motor
- retardation, and inherently also does active freewheeling.
- Supports higher power load, more suitable for violent flight of racing drone.
TECH DATA
- Model: Flycolor TRINX G20
- Con. Current: 60A
- Burst Current: 70A (10s)
- BEC: No BEC
- LiPo cells: 3-6S
- Weight: 14.8g
- Size: 45x41x8.3mm
- Mounting: 20x20mm,M3
- Configurator: BLHeliSuite32
- Firmware：Flycolor_Raptor_5
- Application: 170-450 Multi
Package Contents
- TRINX G20 4in1 x1
- Silicone vibration absorber x4
- O-Ring x5
- Power cable+XT60 x1
- FC/ESC connecting wire x1
- Low ESR capacitor x1
- Aluminum heat sink x1
- Width:
-
10.00
(cm)
- Height:
-
2.00
(cm)
- Depth:
-
0.50
(cm)
- Mounting:
- 20x20
- Amps:
- 60
