FlyColor RAPTOR MINI 60A F7 TR30 STACK
The Flycolor X-Tower F7 60A 3-6S BLHeli32 Freestyle is a top-quality flight stack for FPV drones that has both Bluetooth and LED's.
Note: To enhance the performance of filtering, users can solder the electrolytic capacitor, which is included in the accessory pack, to the positive and negative terminals.
Features
- MOSFET with high performance and low Rds, not afraid of large current, more suitable for rapid flight.
- Two layers tower structure between 4in1 ESC and FC, using cable for quick connection, using silicone vibration absorber for supporting, reducing the effect of vibration on Flight Control.
- Damped light does regenerative braking, causing very fast motor retardation, and inherently also does active freewheeling.
- The code supports regular 1-2ms pulse width input, as well as Oneshot125, Oneshot42, and Multishot.
- All Dshot and Proshot signals are supported.
- Supports SBUS,SPEKTRUM1024/2048 etc. remote control / receiving mode.
- FC integrated 3.3V,5V, 12V for the receiver, VTX, camera, buzzer, LED, and other peripheral devices.
- 4-way led port, independent 5V BEC power supply, making the power supply more safe and reliable.
- Supports Betaflight Configurator to adjust the LED color.
Specifications
- Item Brand: Flycolor
- Item Model: X-Tower 2 60A
- Support Voltage: 3-6S Lipo
- Con. Current: 60A
- Burst Current: 70A
- Structure: Tower
- F.C Volt: 3.3V/5V/10V
- MCU of F7: STM32F722
- F7 Firmware: STM32F7X2 (Config.: FLYCOLORF7)
- ESC Firmware: Flycolor_X_Cross_BL_32
- Bluetooth：FC_Bluetooth.
- USB: Type C
- Installation Hole: 30.5×30.5mm, M3
- Size: 41.7×44.8×16.7mm
- Weight: 26g
ESC
- MCU:STM32F051 ,ARM 32-bit Cortex MCU, frequency up to 48 MHZ.
- MOSFET with high performance and low Rds, not afraid of large current, more suitable for rapid flight.
- ESC firmware: Flycolor_X_Cross_BL_32.
- Two layers tower structure between 4in1 ESC and FC, using cable for quick connection, using silicone vibration absorber for supporting, reducing the effect of vibration on Flight Control.
- Damped light does regenerative braking, causing very fast motor retardation, and inherently also does active freewheeling.
- The code supports regular 1-2ms pulse width input, as well as Oneshot125, Oneshot42, and Multishot.
- All Dshot and Proshot signals are supported.
FC
- FC firmware: STM32F7X2（Config.:FLYCOLORF7）
- FC board:FLYCOLORF7.
- MCU:STM32F722.
- Gyro：MPU-6000 SPI.
- Bluetooth：FC_Bluetooth.
- USB: Type C.
- Supports SBUS,SPEKTRUM1024/2048 etc. remote control / receiving mode.
- FC integrated 3.3V,5V, 12V for receiver, VTX, camera, buzzer, LED and other peripheral devices.
- 4-way led port, independent 5V BEC power supply, making the power supply more safe and reliable.
- Supports Betaflight Configurator to adjust the LED color.
- Install holes:30.5x30.5mm,M3.
Package Contents
- 1 x Combo Stack
- 1 x Accessories pack
