BetaFPV
$399.99
Cetus X is a primary choice for beginners who want to get advanced flight skills. The 2S power makes it stands out, giving Cetus X stronger propulsion and faster speed to perform diverse freestyle tricks. Equipped with M04 400mW VTX and C04 FPV camera that is optimized for longer radio and video transmission. Two FC versions provide different functions to pilots but all help pilots to the next level.
Equipped with F4 1-2S 12A flight controller, Cetus X brushless quadcopter supports ELRS 2.4G or Frsky D8 RX protocol. Both RX versions support the Betaflight configurator and have great performance in maneuverability, power, and flight time. Pilots who had Cetus Pro or Cetus RTF Kit can continue to use LiteRadio 2 SE radio transmitter to fly Cetus X Frsky D8 version.
Cetus X with the classical Cetus flight controller version is released. It supports the position hold function, which provides easier control to pilots. If select the Betaflight FC version, pilots are able to learn and understand the drone configuration. Both FC versions perform great in power and speed and have higher-grade flight modes for pilots to get advanced.
| Cetus FC Version | Betaflight FC Version | |
| Flight Controller | Cetus BL V3 Flight Controller | F4 1S 12A Flight Controller |
| Receiver Protocol | Frsky D8 | ExpressLRS 2.4G/Frsky D8 |
| Flight Mode | N/S/M/Turtle Mode | Angle/Horizon/Air/Turtle Mode |
| VTX | 25-350mW | 25-400mW |
| Position Hold | Support | Not Support |
| Configuration Software | BETAFPV Configurator | Betaflight Configurator |
Note: Pilots who have LiteRadio 2 SE in Cetus or Cetus Pro FPV Kit can bind and fly the Cetus X Cetus FC version.
Built-in highly precise barometer to detect the height, the version with Cetus FC benefits from great stability due to its position hold mode, and auto-hovering, which enables the drone to stay at the current height. This function also ensures an emergency landing of the drone whenever loses control or is on low battery. Meanwhile, its stable flight allows you to catch the best footage with the FPV Goggles. It really does an immense amount of fun and ease of flight for all pilots.
Powered by 2S, Cetus X has loads of punch and speed, making it smoother and more suitable for outdoor practice, great for the next level. For indoor practice, the Cetus Pro with 1S power, which has the same auxiliary flight function, is easier for initial pilots to control and fly.
Note: The position hold function is only available in N mode.
Cetus X Brushless Quadcopter comes with M04 25-400mW VTX and C04 FPV camera. The VTX features a lightweight and adjustable output power for longer distance flying. Combining this VTX and the excellent radio link ExpressLRS 2.4G/Frsky D8, pilots can fly whoop drones longer to explore more possibilities and have fun. In addition, C04 FPV camera (based on Caddx Nano Ant Camera/Runcam Nano 4) shows better quality in FPV flight compared with C02 FPV camera.
Equipped with 1103 11000KV Brushless Motor and Gemfan 2020 4-blade props . 1103 motors are designed for 2S quadcopters with incredible power, smooth and quiet operation, and light enough. Besides, Cetus X quadcopter adopts 2020 4-blade props, which are lighter and durable enough, offering pilots a high-efficiency flight experience.
Cetus X Brushless Quadcopter Betaflight FC version supports configuring on Betaflight configurator. It is a primary choice for beginners who start to learn drone configuring, which helps beginners to get advanced level. With the Betaflight configurator, you can calibrate accelerometer, custom OSD content, adjust the video transmitter and etc.
Note: Please DO NOT configure ESC or Motor settings on Betaflight configurator.
Cetus X brushless quadcopter is built-in F4 1S 12A FC board, supporting ELRS 2.4G, or default Frsky D8 protocol. The ELRS 2.4G version comes with betaflight 4.3.1 FC firmware so it supports ELRS V2.0. The Frsky version can be switched to the Futaba SFHSS protocol through the Betaflight configurator. The ESC on the new board powered by BB51 hardware comes with Bluejay 48k ESC firmware, allowing F4 1S 12A FC SPI Frsky
to give full play to the efficiency of power. We update the gyro to BOSH BMI270 for better performance and stability since the new F4 1-2S 12A FC.
| Cetus X (ELRS 2.4G) | Cetus X (Frsky D8) | |
| FC Inside | F4 1S 12A FC SPI ELRS 2.4G | F4 1S 12A FC SPI Frsky |
| Gyro | BMI270 | BMI270 |
| FC Firmware | BETAFPVF411SX1280 | BETAFPVF411RX |
| ESC Firmware | C_X_30_48_ for Bluejay BB51 hardware | C_X_30_48_ for Bluejay BB51 hardware |
For Cetus X ELRS 2.4G version, the Betaflight firmware 4.3.0 and up start to support BMI270 gyro. For Frsky D8 version, we recommend using BETAFPVF411RX 4.2.11 firmware and CLI dump file offered by BETAFPV.
The default flight controller firmware enables bidirectional D-shot and is compatible with Bluejay ESC firmware. If you update the 4.3.0 and up firmware for ELRS 2.4G from the Betaflight official site, please flash the CLI dump file for Cetus X.
Download the firmware and CLI dump file for Cetus X ELRS 2.4G or Frsky.
The Bluejay firmware could support the BB51 hardware now. Both ELRS and Frsky boards are powered by BB51 hardware. If you want to setup the ESC specification, please use the BLHeliSuite16714902A_Beta or ESC-Configurator.
Note: Only ELRS 2.4G version supports motor direction set through Betaflight Configurator and SPI Frsky version does not support it. BLHeli Configurator and Bluejay Configurator are invalid for the BB51 ESC (both versions).
PACKAGE CONTENTS
BetaFPV
BetaFPV
BetaFPV
BetaFPV