BetaFPV BT2.0 to PH2.0 Power Connector (6pcs)

$7.86

SKU:

BT-M1

BetaFPV BT2.0 to PH2.0 Power Connector (6pcs)

BT2.0 Connector - the most significant revolution in 1S Tiny Whoop Drone.

To provide our customers with greatest convenience, we specially made this adapter cable, this adapter cable will be a perfect solution when you want to charge the BT2.0 300 mAh 1S battery with the PH 2.0 charger.

FEATURES

BT2.0 connector decreased internal resistance of connector effectively by upgrading the crimped pins to banana connector and increasing the cross-sectional area of banana connector.

With these connectors, it can support 9A continuous current and 15A burst, while the PH2.0 connector supports 4.5A continuous current.

By solving the problem of voltage sag, the discharge of the 300mAh 1S BT2.0 lipo becomes more efficient. Pilots can enjoy more flight time without disturbance of low voltage warning.

Compared with the PH2.0 crimped pins, BT2.0 connector is more durable which can discharge more currents in the same capacity and provide far more power. You can get 2mins flight time in full throttle on Meteor65 if you use our BT2.0 300mah 1S Battery.

SPECIFICATION

Item: BT2.0-PH2.0 Adapter Cable

Length: 55mm (Not included the plug)

Weight: 1.07g(1 pcs)

Wire Type: 22AWG

Input Port: PH2.0 male connector?connect PH2.0 charger?

Output Port: BT2.0 female connector?connect BT2.0 battery?

Note: Blue represents the positive pole (+); White represents the negative pole(-)

There is a graph of comparison between BT2.0 connector and PH2.0 connector (solid pins version) in BETAFPV 1S 300mAh battery. The discharge current is 9A in this testing. You could see that it has double time (about 2minutes) with BT2.0 connector.