Start your FPV journey with the Sub250 Whoopfly16 Ready to Fly Kit - protecting you in the sky with its inverted pusher design and protective frame. Comes with the Drone, Radio Transmitter, Goggles 01, and a Case to get you out flying right away and experiencing the thrills of FPV!
Sub250 MicroRadio ELRS 2.4GHz remote control with a maximum transmission power of 500mW, 8 channels of ultra-low latency, working off replaceable 18650 batteries, and supports USB type-C charging.
The FPV Goggles 01 uses dual antennas, support card recording DVR, built-in 3.7V 2000mAh battery that can be used for up to 2.5 hours, supports USB fast charging, and one-key search frequency point. Featuring a multi-function menu design making the operation more convenient.
Features
Throttle Stick on the left joystick (mode2)
DVR Recording
Built-in 200mW VTX
ELRS 2.4GHz
Camera 30° Adjustable
1S Power
Specifications
Product name: Whoopfly16 Analog ELRS 2.4
Frame: WF16
Wheelbase size: 75mm
Flight control system: Redfox A1 F4 5A 4in1 1S AIO FC
MCU: STMF411
IMU: ICM42688-P
OSD: BetaFlight OSD w/AT7456E chip
ESC: Redfox A1 4IN1 5A ESC
VTX: VTX 5.8G 200mW
Lens: Caddx Ant eco
Propeller: Gemfan 1608-3
Antenna: 5.8g copper tube antenna 70mm
ELRS Version weight: 35.2g
Receiver: ELRS 2.4G (SPI)
SUB250 MICRORADIO ELRS 2.4G TRANSMITTER
Product name: MicroRadio
Size:147x135x71mm (Not including antenna)
Weight:223g
Adapted Drone Type: Multirotor, Airplane
Frequency band:2.4GHz ISM
Input voltage:6.6-8.4V
Antenna interface: SMA
Power:100/250/500mW
Channel:8 channel
Charging interface: USB-C
Firmware upgrade: Support
Bluetooth joystick: Support
Sub250 Goggles 01
Product name: Goggles 01
Resolution:800 x 480px
Size of screen: 4.3 inch
Size: 155mm x 144mm x 113mm
Built-in Batteries: 3.7v / 2000 mAh
Working Time: 2.5 hours
Weight: 314.6g
Package Contents
1x Sub250 RTF Whoopfly16 Ready to Fly ELRS Analog Kit - Model 2 w/ Goggles, Radio Transmitter, Case & Drone
1x MicroRadio
1x Sub250 Goggles 01
1x Sub-CW1 charger
2x Sub250 530mAh 90C 1S batteries
4x 1608-3 Propellers
1x Phillips screwdriver
1x L-type Allen screwdriver (1.5mm)
1x Portable Storage Bag
DO NOT FLASH YOUR FIRMWARE.
Caution is advised when considering re-flashing Betaflight firmware, especially for beginners. Changing any firmware without sufficient knowledge and experience can result in potential risks, such as errors, system failures, or irreparable damage to your drone. We highly discourage any firmware modifications to ensure the safety, stability, and optimal performance of your product. If you require assistance or have specific firmware-related needs, it is strongly recommended to seek guidance from experienced individuals or professionals. By proceeding with firmware modifications, you assume full responsibility for any consequences that may arise.