null

SpeedyBee F405 40A AIO

$78.99
SKU:
RC-O3

SpeedyBee F405 40A AIO

SpeedyBee F405-AIO-40ASpeedyBee F405-AIO-40ASpeedyBee F405-AIO-40ASpeedyBee F405-AIO-40ASpeedyBee F405-AIO-40ASpeedyBee F405-AIO-40ASpeedyBee F405-AIO-40ASpeedyBee F405-AIO-40ASpeedyBee F405-AIO-40ASpeedyBee F405-AIO-40ASpeedyBee F405-AIO-40ASpeedyBee F405-AIO-40A

  • Product Name: SpeedyBee F405 AIO
  • Flight Controller
    • MCU: STM32F405
    • Gyro: ICM-42688P
    • USB Port: Type-C
    • Barometer: SPA06-003
    • OSD Supported
    • Bluetooth: BLE Supported, Bluetooth speed enhancement - 2.0
    • Wireless Flight Controller Firmware Update: Supported (no need to press physical BOOT button)
    • Wireless Download & BlackBox Analysis: Not supported
    • DJI Air Unit Connection Method: Supports both 6-pin direct insertion and soldering
    • 6-pin DJI Sky Port Direct Insertion: Supported, can directly connect to DJI O3/RunCam Link/Caddx Vista without changing wire order
    • Flash (for BlackBox): 8MB
    • Betaflight CC Pads (Camera Parameter Adjustment): Supported
    • Input Voltage: 3S-6S LiPo battery
    • 4V5 Output: Two 4V5 outputs; total current 1A
    • 5V BEC Output: Three 5V outputs; total current 2A; shared with 4V5
    • 9V BEC Output: None (comes with an external BEC module, can switch between 5V and 9V); total current output 2A
    • MOTOR: M1-M4
    • UART: 4 full-function serial ports (UART3, UART4, UART5, UART6 + SBUS[R2])
    • ESC Telemetry: None
    • I2C: Supported
    • LED Pads: Supported, used to control WS2812 LED lights
    • Buzzer Pads: Supported, BZ+ and BZ- pads
    • BOOT Button: Supported, press and hold the BOOT button while powering on to enter DFU mode for firmware recovery
    • RSSI Pads: None
    • SmartPort: Not supported
    • Supported Flight Controller Firmware: BetaFlight (Default), INAV
    • Firmware Target Name: SPEEDYBEE F405AIO
    • Mounting: 25.5 x 25.5mm, 2mm hole diameter
    • Dimensions: 33.0mm (length) x 33.0mm (width) x 8mm (height)
    • Weight: 13.6g (including CNC)
  • ESC
    • Input Voltage 3-6S LiPo battery
    • Continuous Current 40A
    • Burst Current 45A (10s)
    • ESC Protocol Supports DSHOT600/300; other protocols may cause severe errors, please use with caution.
    • Output Voltage VBAT battery voltage (used to power the flight controller)
    • Current Sensor Supported (Scale = 254, Offset = 0)
    • Firmware Bluejay JH-40 48kHz

Downloads

Package Contents

  • 1 x Flight Controller
  • 1 x Accessory Pack (See pic above)

 

Width:
6.00 (cm)
Height:
6.00 (cm)
Depth:
0.50 (cm)
Mounting:
AIO
CPU:
F4
Amps:
40