Hobbywing XRotor Combo Stack - F7 + 65A
The XRotor Micro Combo from Hobbywing continues to impress with its latest iteration. The Micro Combo features a 65A 4-in-1 ESC along with an updated F7 Flight Controller. This new FC is similar to other versions with its OSD, and voltage monitoring, but the F7 now comes with an all-new 5V & 12V dual BEC Circuit and a special interface for the DJI image transmission system.
Make your electronics stack work for you, not the other way around!
Specifications
F7 FC
- Compatible with (Modes): PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600, DShot1200, Proshot1000 and etc
- Compatible with (Transmitters): PPM, Spektrum, SBUS, SUMD, SUMH, XBUS, IBUS, JETIEXBUS, CRSF, SRXL
- Mounting Holes: Convertible 20x20mm / 30.5x30.5mm
- Programming via: Betaflight/Cleanflight-configurator
- Firmware: HOBBYWING_XROTORF7CONV
- Voltage Monitoring: Supported
- Current Monitoring: Supported
- FC Programming: Supported
- External Buzzer: Supported
- BEC: 5V@1.5: 10V@1.5A
- LED Control: Supported
- USB Port: MicroUSB
- Size: 32x32mm
- OSD: Built-in
- Weight: 3.3g
ESC Specifications
|
Model |
XRotor FPV 30x30 ESC G2 |
|
SKU |
30902064 |
| Application | FPVs with 130-280mm Diagonal Wheelbase |
| LiPo Power input | 3S-6S |
|
Cont.Current |
65Ax4 |
| Burst Current | 80Ax4 |
| BEC Output |
5V@0.6A |
| Input wires | 12AWG-130mm* (Red/Black) |
| Output Wire | No wires but solder tabs |
| Connectors (In/Out) |
XT60 (w/ Wires Soldered on) /no |
| Weight / Size | 15g / 52x42x6.6mm |
| Mounting holes | 30.5x30.5mm |
| Throttle Calibration | Supported |
| ESC Programming | BLHeliSuite32 |
| DEO | Supported |
| OneShot Mode | Supported |
| Timing | Supported |
| Motor Rotation | Supported |
Package Contents
- 1x Hobbywing XRotor Micro Combo Stack - F7 FC + 65A 4-in-1 BLHeli_32 ESC
- 1x Soft Mounting Grommets Set
- 1x Signal Cable
Please note, this vendor requests you contact them directly for all warranty claims.
- Mounting:
- 30.5x30.5
- Amps:
- 65
- CPU:
- F7
