GEPRC Tern-LR40 HD O3 - SUB-250g PNP
*Pictures may vary from what is shown. Available in various options - Analog, DJI FPV & Avatar FPV.
In the GEPRC family, we have welcomed a new member: Tern-LR40. This is a 4-inch long range FPV with excellent performance and reliability. It adopts a DC-type structure. Its careful lightweight design uses aviation-grade 7075 aluminum parts. Light and rigid.
Equipped with Taker G4 45A AIO flight control, which has higher computing power redundancy. The use of a top-mounted fixed GPS can avoid the impact of its own electromagnetic interference on flight, and the rescue function is more stable.Silicone camera shock-absorbing pad prevents high-frequency jelly from O3 camera.
The Tern-LR40 is like a bird with spread wings, flying freely through the blue sky without being restrained. Choosing it is not only a high-quality flight, but also an artistic journey.
Features
- New lightweight design, weight under 249g.
- Expand interference GPS fixation method and stay away from interference sources
- DC structure cannot see the propellers during flight, which is more suitable for straight-line aerial photography.
- Install BB ring to set the battery low voltage alarm
- Using GEP-M10nano GPS, the satellite search speed is faster and the rescue mode is more stable.
- Compatible gopro mount installation, expandable shooting creation.
Specifications
- Model: Tern-LR40
- Frame: Tern-LR40 Frame
- Wheelbase: 180mm
- Top plate: 1.5mm
- Mid plate: 2.0mm
- Bottom plate: 1.5mm
- Arm thickness: 3.5mm
- FC: Taker G4 45A AIO
- MCU: STM32G473CEU6
- Gyro: ICM 42688-P
- OSD: Betaflight OSD w/AT7456E
- ESC: 32Bit 45A
- VTX: O3 Air Unit
- Camera: O3 camera
- Antenna: 5.8G&2.4G
- Motors: GEP-SPEEDX2 1404 3000KV
- Propellers: HQProp T4X2.5Grey (2CW+2CCW)
- Tern-LR40 O3 PNP version weight: 180g±5g
- Receiver: PNP
- Recommended battery: LiPo 4S 660mah-850mah
- Flight time: 10-25min
Package Contents
- 1 x Tern-LR40
- 2 x HQProp T4X2.5Grey (2CW+2CCW)
- 2 x battery anti-slip mat
- 1 x screw pack
- 4 x Battery strap M15*170mm
- 1 x L-shaped screwdriver 1.5mm
- 1 x GoPro camera mount holder
- 1 x T-type Antenna mount
- 1 x RC Printed parts
- Receiver Type:
- PNP (No RX)