GEPRC CineLog20 4S 2" w/ Analog System - ELRS 2.4 BNF
For the shooting needs of complex indoor environments, GEPRC has recently released the 2" Cinewhoop CineLog20.
The CineLog20 continues the CineLog series with a lightweight pusher design, and the redesigned camera gimbal vibration reduction solution provides an excellent mounting platform, which can achieve an excellent anti-shake effect. It is lighter in weight and has a longer battery life.
It adopts GEPRC SPEEDX2 1303.5 5500KV motor and GEP-F411-35A AIO. Equipped with Emax 4-blade propellers, a reasonable and efficient power system makes the CineLog20 very quiet and has a long battery life, making your flight and shooting more assured. Using the one-piece injection molding camera mount, you can quickly mount GEPRC naked GoPro 8/9/10/11 cameras, Action2, insta360 Go2, Peanut, and other light and small action cameras.
Features
- Designed to mount a shock-absorbing gimbal under the independent FPV camera to reduce jello of FPV Goggles image, with good anti-shake effect.
- 2-inch pusher design, small size and lightweight, more suitable for complex and narrow environments flight shooting.
- SPEEDX2 1303.5 5500KV motor with Emax four-blade propellers make the flight shooting unhurried.
- Continuing the vibration-dampening structure of the CineLog series, which can effectively eliminate the jello of the image caused by the body when flying with a Naked GoPro mounted.
- The GEPRC Team’s splendid tuning and overall flight feel are delicate and flexible.
Specifications
- Model: GEPRC BNF Cinelog20 2" Cinewhoop
- Frame: GEP-CL20
- Wheelbase: 100mm
- Gimbal plate: 2.0mm
- Top plate: 2.5mm
- Bottom plate: 1.5mm
- FC system: GEP-F411-35A AIO
- MCU: STM32F411CEU6
- Gyro: ICM 42688-P
- OSD: Betaflight OSD w/AT7456E chip
- ESC: 8Bit 35A
- VTX: GEPRC 5.8GHz@600mW
- Camera: Caddx Ratel2
- Antenna: GEPRC Peano 5.8G RHCP MMCX
- Motor: GR1303.5 5500KV
- Propeller: EMAX Avan Micro 2×2.4×4
- Receiver: ELRS 2.4
- Recommended battery: LiHv 4S 450mah-660mah
- Flight time: 4-6min
Package Contents
- 1x CineLog20
- 2x 2-inch propellers (pairs)
- 1x Naked GoPro Base
- 2x M15×150mm battery strap
- 2x Battery Silicone Pads
- 2x EVA Landing Pads
- 1x Set of screws
- 1x L-shaped screwdriver (1.5mm)
- 1x Antenna fixed tube
- 1x 4S Naked GoPro power cable (with balanced terminal head)
- 2x EVA damping rings of guards
- 1x TBS Antenna mount (Vertical Type)
- 1x TBS Antenna mount (Horizontal Type)
- 1x TBS Antenna printed parts
- 3x M2×12mm cup head screws
- 2x M2×5mm round head screws
- 1x M2×8mm round head screw with pad
- 3x M2×7mm round head screws
- 2x M2×8mm round head screws
- 2x M2 iron nuts
- 1x self-clinching nut