Description

DYS F722 FC 65A AM32 ESC Combo Stack

The new DYS F7 Flight Controller features an STM32F722 MCU, ICM42688P gyroscope, BMP280 barometer, and AT7456E OSD. It includes a 16MB black box, 6 UART ports, and 8 motor ESC signal. The BEC output offers 3.3V/1A, 5V/3A, and 12V/3A, while the unit itself measures 38mm x 38mm and weighs 10g. It is compatible with 6S Lipo input and features a mounting hole size of 30.5mm x 30.5mm/M3. Additionally, it has a VTX switch and an Air Unit port for added convenience.

The DYS 65A 4in1 ESC is running the AM32 Firmware and capable of handling an input voltage range of 2-8S Lipo. It can provide a continuous current of 65A and a burst current of 80A, with a weight of only 15.3g. With a current rate of 200 and a mounting hole size of 30.5mm x 30.5mm/M3, this ESC is a reliable and efficient choice for your setup.

SPECIFICATIONS

Flight Controller

MCU: STM32F722
Gyroscope: ICM42688P
Barometer: BMP280
OSD: AT7456E
BEC Output: 3.3V/1A; 5V/3A; 12V/3A
Black box: 16MB
UART: 6 Ports
ESC Signal: 8 Motors
Air Unit Port: Yes
VTX Switch: Yes
Input: 6S Lipo
Size: 38mm x 38mm
Mounting Hole: 30.5mm x 30.5mm/M3
Weight: 10g

4in1 ESC:

AM32 firmware with F4 MCU
Open Source firmware
Firmware upgradable via Betaflight passthrough (make sure your Betaflight firmware is up to date when you try to use passthrough)
Article explaining AM32 by Oscar Liang
Input Voltage: 2-8S Lipo
Continuous current: 65A
Burst Current: 80A
Weight: 15.3g
Current Rate: 200
Mounting Hole: 30.5mm x 30.5mm/M3