TransTEC F7 HD for DJI FPV System

SKU:
TTRA1011BDR
$50.99

TransTEC F7 HD for DJI FPV System

FEATURES

 

  • High Quality, gold plated 1.6mm thick PCB
  • Type-C USB connector for programming
  • Dimensions:6mm
  • Mounting Holes:5mm square to center of holes 
  • Weight: 6g
  • Betaflight support– Target TransTEC F7 
  • BLHeli passthrough flashing supported by hardware

 

SPECIFICATIONS

  • MCU:216MHz STM32F722RET6
  • IMU:MPU6000 Low noise power filter
  • Anti-Vibration silicone grommets built in
  • 4x Uarts(1,2,4,5) with built-in SBUS inversion
  • 4x Dshot/Proshot/Oneshot outputs(Support Bidshot)
  • 1x JST-SH 1.0_8pin connector (G/Vbat/S1/S2/S3/S4/Current/R4)
  • 1x GH_1.25_6pin connector for DJI HD Vtx
  • Vbat filtered output powerfor VTX(12V for DJI HD system)
  • WS2812 Led Strip support(5V output)
  • Backup solder pads for ESC and Vtx
  • Input:6~30V (2~6S LiPo)
  • BEC:5V 2A cont. (Max.3A)
  • BEC: 12V 1.5A cont.
  • LDO 3.3V: Max.200mA
  • USB Type-C connector

USB-C connector socket.

Dji Air unit One-Cable socket.

Back-up solder pads for ESC and Air unit.

PACKAGE CONTENTS

  • 1x TransTEC F7 HD version Flight Controller
  • 5x Anti-vibration silicone grommets (for M3 sized screws)
  • 2x DJI Air unit cable(short/long)
  • 2x ESC cable(contain 6/8/10 pin socket)
  • 1x USB-C dust plug

 

Width:
10.00 (cm)
Height:
10.00 (cm)
Depth:
10.00 (cm)
Mounting:
30.5x30.5
CPU:
F7