null

SpeedyBee F745 35A AIO

$168.99
SKU:
RC-U1

SpeedyBee F745 35A AIO

Make sure this AIO's slightly bigger size can fit your frame! The size of this AIO is 36.5(L)*36.5(W)*7.0(H)mm.
We suggest you use this AIO on your 3.5" to 5" cinewhoops/long-range or lightweight quads. For quads below 3.5",you should carefully check if your quad has enough room for this AIO.

SpeedyBee F745 35A AIOSpeedyBee F745 35A AIOSpeedyBee F745 35A AIOSpeedyBee F745 35A AIOSpeedyBee F745 35A AIOSpeedyBee F745 35A AIOSpeedyBee F745 35A AIOSpeedyBee F745 35A AIOSpeedyBee F745 35A AIO

Specifications

  • SpeedyBee F745 35A BLS AIO
    • Power Input 3S - 6S Lipo
    • Mounting 25.5 x 25.5mm, 3mm hole diameter
    • Dimension 36.5mm(L) x 36.5mm(W) x 7mm(H), recommended for quads at 3.5" or above
    • Weight 10.1g
  • FC
    • MCU STM32F745
    • IMU(Gyro) MPU6000
    • USB Connection Need to solder a USB TYPE-C module to D+,D-,GND pads.
    • Barometer BMP280
    • OSD Supported
    • BLE Bluetooth Supported. Used for parameter configuration
    • Flash FC Firmware Wirelessly Supported
    • Download/Analyze Blackbox Supported
    • DJI Air Unit 6-pin Connector Built-in.
    • Flash(for BlackBox) 8MB
    • Current Sensor Supported. Scale=256
    • BetaFlight Camera Control Pad Yes(CC pad)
    • 5V Output 4 groups of 5V output. The total current load is 2.5A.
    • 9V Output None
    • 3.3V Output Supported. Up to 500mA current load.
    • ESC Signal Pads M1 - M4
    • UART Full UART * 4(UART1, UART2, UART3,UART4)
    • ESC Telemetry UART None
    • I2C Supported.
    • LED Pad Used for WS2812 LED
    • Buzzer BZ+ and BZ- pad used for 5V Buzzer
    • BOOT Button Used to enter DFU mode
    • RSSI Input Not supported
    • SmartPort Use any TX pad of UART for the SmartPort feature.
    • Supported Flight Controller BetaFlight(Default)
    • Firmware Firmware Target Name SPEEDYBEE F745AIO
  • ESC
    • Power Input 3-6S LiPo
    • Continuous Current 35A * 4
    • Burst Current 45A(5S)
    • ESC Protocol DSHOT300/600
    • Power Output VBAT
    • Current Sensor Supported(Scale=256)
    • Firmware BLHeli_S JH40

Downloads

SpeedyBee F745 35A AIO

 

Package Contents

  • 1x SpeedyBee F7 Mini 35A 3-6S 20x20 Stack/Combo

 

Width:
6.00 (cm)
Height:
6.00 (cm)
Depth:
0.50 (cm)
Mounting:
AIO
CPU:
F7
Amps:
35