SpeedyBee BT Nano 3 Wireless FC + ESC Configuration (CLEARANCE)

$11.99 $8.97

Out of Stock

Out of Stock

SpeedyBee BT Nano 3 Wireless FC + ESC Configuration

Eliminate wire constraints and complicated driver installations with the SpeedyBee BT Nano 3 Wireless FC + ESC Configuration. Supports the SpeedyBee App for wireless FC & ESC full configuration. The nano-size SpeedyBee BT Nano 3 Configuration features password protection and its Bluetooth automatically turns off when not in use to avoid interference.


  • Wireless FC + ESC Configuration
  • Bluetooth automatically turns off
  • SpeedyBee App connectivity
  • Password protection
  • Nano-size


  • Bluetooth Automatically Turns Off: Enabled by default, the module will automatically detect the armed/ disarmed status of the FC. During the drone's flight, the Bluetooth function will be disabled to prevent other wireless devices from being interfered with by the Bluetooth signal. Operating Voltage: 5V
  • BT Switch Pad: The Bluetooth function will be disabled when it receives a Low signal. In the BT Switch section of the manual, you can learn about the detailed instructions
  • WiFi: Supports. It will be turned on automatically only when upgrading the module's firmware.
  • Power Indicator: Solid Red: Indicates that the module is powered.
  • Working Current: MAX~87mA(5V)
  • Bluetooth Low Energy: Supports
  • Communication Port: UART
  • Size: 14*11*0.8mm
  • Baudrate: 115200
  • Weight: 5g

Working Status Indicator

  • Flashing white: Indicates that the UART communication with FC is abnormal, please check whether the wiring and settings are correct.
  • Solid White: Indicates that the communication with FC is normal, you can use the App for wireless parameter adjustment
  • Flashing green: Indicates that the wireless signal is being connected
  • Solid Green: Indicates that the connection with the App has been successful 



  • 1x SpeedyBee BT Nano 3 Wireless FC + ESC Configuration
  • 1x 29 AWG 19cable 75mm for BT Switch pad soldering
  • 2x 3M double-sided tape 14mmx30mm
  • 1x Heatshrink tube 18mm diameter


5.00 (cm)
1.00 (cm)
0.05 (cm)