SkyStars KRAMAM F722HD 60A Combo Stack


SkyStars KRAMAM F722HD 60A Combo Stack

Skystars has assembled their top of the line FC and ESC into one convenient stack that is plug and play ready for DJI.


  • DJI Plug and Play Ready
  • 4 LED pads
  • F722 Processor
  • Excellent over-current capability
    • By adopting the best PCB material and PCB production process. Such as application of high TG materials, 3oz copper PCB & 2μm gold deposition process on PCB. Together with independent current board layout design, can withstand bigger current.
  • Extreme stably support 6S LiPo battery
    • By use of 24 pcs of new ON brand standard 40V 5x6 Mosfet & imported from USA or Japan electronic materials. Plus advanced lead-free SMT Processing technology.It makes ESC can fully support 6s battery and get better performance.
  • Excellent heat dissipation performance
    • F1 racing car appearance of CNC hollow aluminum alloy shell used, Not only good for heat dissipation but also get a beautiful appearance.
  • Better control performance
    • Flashed with the latest Blheli_32 firmware in factory, support telemetry functions (including voltage, RPMS & current )


  • Skystars F722 HD 30x30 Flight Controller for DJI

    • MCU: STM32F722
    • Gyro: MPU6000
    • OSD: Betaflight
    • Uarts: 6
    • LED Pads: 4
    • Buzzer Pad: Yes
    • Flash: 8.0M
    • BEC: 5V3A/10V3a
    • Weight: 28g (both FC & ESC Combo with hardware)
    • Input voltage: 3-6S LiPo
  • Skystars Kramam 60A 32Bit 3-6S 30x30 4in1 ESC
    • Con.Current: 60A
    • Peak Current: 80A≥ 10S
    • Firmware: BLHeli_32
    • Support: Dshot 600/1200
    • Mounting hole: 30.5mm/M3
    • BEC: No
    • Product size: 41*46*7.6mm
    • Weight: 18g


  • 1 x Skystar F722HD FC
  • 1 x Skystar KM60 60A 3-6S 4 in 1 ESC
  • 1 x Full mounting kit (Hardware options, gummies and o-rings)
  • 1 x XT60 connector and wires
  • 2 x 8pin wiring harness (1x 70mm,1x 50mm)
  • 1 x DJI Air Unit to FC wire
  • 1 x 35v 560uf Capacitor


0.05 (cm)
0.05 (cm)
0.05 (cm)