SkyStars H7 Flight Controller - Single Gyro
The Skystars H7 Single Gyro Flight Controller is a future-proof FC with X8 support, OSD, BMI270 gyro, BMP280 barometer, 16M Blackbox, 8 UARTS, and more!
Features
- X8 support
- OSD, BMI270 gyro
- MCU running at 480MHz
Specifications
- MCU: STM32H743VIT6, 480MHz, 1MB RAM, 2MB Flash
- Gyro: BMI270
- Baro: BMP280
- OSD: AT7456E
- Blackbox: 16M
- 8x Uarts (1,2,3,4,6,7,8) with built-in inversion.
- 8x PWM outputs
- 1x I2C
- 3x LEDs for FC STATUS (Blue, Green) and 3.3V indicator(Red)
- USB Type-C(USB2.0)
- 2x JST-SH1.0_8pin connector (Gnd/Vbat/S1/S2/S3/S4/Rx3/Curr)
- 1x JST-SH1.0_6pin connector (R1/G/R6/T6/G/10V)
- Dual Camera Inputs switch
- VTX 10V/Vbat filtered power ON/OFF switch
- DJI FPV OSD is supported by any spare UART
- Vbat Input: 7~25V (2~6S LiPo)
- BEC: 5V 2A Continuous (Max 3A)
LDO 3.3V: Max 250mA
- Firmware: Betaflight - SKYSTARSH7HD
- Mounting: 30.5 x 30.5mm
- Dimensions: 39.5 x 39.5 x 7.8 mm
- Weight: 10.1g
Package Contents
- 1x Skystars H743 HD Flight Controller - 30x30 - Single Gyro
- 1x Accessories Pack
