null

iFlight Nazgul5 V2 - PNP

$343.99
SKU:
NAZGUL5-PNP

iFlight Nazgul5 V2 - PNP

NOTE:

  • GoPro Adjustable Mount is Included.
  • Camera has been changed to the RaceCam R1
  • Updated Stack to F7 Succex-E & BMI270
  • Upgraded to the Xing-E Pro motors. 

The Nazgul5 V2 comes pre-tuned and setup, everything you need! Slap on an RX of your choice and send it. Loads of power and smooth flights guaranteed using our popular XING-E motors with long-lasting NSK bearings. Got a hard hit and snapped an arm? Don't worry, get some spares with your order and easy-swap out in field. Wanna strap your GoPro on that beast as well? Checkout our collection of high quality TPU prints for your cam!

Features

  • 5mm arm design for more durability
  • Easy-Swap arms
  • LED illuminated Logo
  • XING-E 2207 motors and NAZGUL 5140 props
  • 5" version also fits 5.1" style propellers
  • Popular True-X configuration
  • TPU crash-guards
  • Fits both 30.5x and 20x stacks

Specifications

  • Item: SucceX-Force 800mW adjustable VTX
  • Input voltage:5V
  • Output voltage/ Max current: 5V 1A
  • 12V input current: 40mA@PIT MODE, 95mA@25mW, 185mA@200mW,250mA@400mW, 380mA@800mW
  • Output 48 frequency points, 
  • size:36*36*3mm
  • PIT/25mW/200mW/400mW/800mw 

Tips:

 VTX is set to 25mW by default! Power levels above 25mW require a HAM license or have to be approved by local authorities! Please ensure you're flying legal frequencies and use our prepared Betaflight VTX tables according to your region.

XL5 V5 frame specs:

  • SucceX-E 45A V2 2-6S BLHeli_S 4-in-1 ESC
  • SucceX-E F7 V2.1 Flight Controller
  • XING-E 2207 FPV Motor (6S 1800KV / 4S 2750KV)
  • Wheelbase: 240mm*240mm
  • Body size: 170*170mm
  • Propeller size: 5 inch /5.1 inch
  • FC pattern: 30.5*30.5/20*20 mm
  • FPV cam spacing: 19mm
  • Weight: 393.4g (without battery)

PRE-TUNED & PRE-SETUP:

  • Don't worry about tuning, we did that for you already! A basic PID- and Filter tuning was applied for a great flight experience!
  • To restore lost tunes or updates, please check our linked article on "Firmware/Factory Dumps"
  • Angle-Mode (self balancing level mode) is enabled by default to make sure your first flight doesn't end in a mess!
  • Please check our linked article on "How to disable Angle-Mode, activate Acro-Mode"


Nazgul5 V2 Quad BNF Included Components and Parts

  • Prebuilt and tested Quadcopter
  • 1x XL5 V5 Frame
  • 1x Caddx Ratel, 2.1mm lens camera
  • 1x Albatross RHCP SMA 5.8g antenna
  • 2sets x Nazgul 5 inch 3-blades (Set of 4 - Color may vary)
  • 1x 20*200mm Microfiber PU Leather Battery Strap (Color May Vary)
  • 1x 20*250mm Microfiber PU Leather Battery Strap (Color May Vary)

FC // SucceX-E F7 Flight controller

  • MCU: STM32F22RET6 216MHz
  • Gyro: MPU6000
  • Baro: DSP310 (Barometer can only be used with Betaflight 4.3.0 and above)
  • OSD: IFLIGHT OSD (AT7456E)
  • BEC: 5V 2.5A
  • BlackBox: 16MB
  • Uart: 4*UART(UART1、UART2、UART4、UART5)
  • UART1 for VTX HD(for 4-6S Vista,for 4S DJI Air Unit)/AnalogTelemetry
  • UART2 for Receiver
  • UART4 for Free
  • UART5 for ESC Telemetry
  • 4×Dshot/PWM outputs
  • Smartaudio & IRC Tramp VTX protocol supported
  • WS2812 led Strip: Yes
  • Beeper: Yes
  • Firmware: IFLIGHT_SUCCEX_E_F7
  • Outer Size: 36*36mm / 30.5*30.5/φ4 mounting
  • Weight: 6.9g

ESC // SucceX-E 45A 2-6S BLHeli_S 4-in-1 ESC

  • Dimension: 36*43mm
  • Mounting Holes: 30.5*30.5mm/Φ3mm
  • Weight: 15g (without wire)
  • Supports 2-6S Lipo input
  • EFM8BB21 MCU, 24Mhz Runs BLHeli_S 16.X Firmware
  • Current sensor: YES
  • BEC: NO
  • Constant: 45A / Burst: 50A
  • Supports: DShot150/300/600/MultiShot/OneShot etc.
  • Target: G-H-30 BLS 16.7

VTX// SucceX Force 5.8g 800mW VTX Adjustable

  • The output power is stable;
  • Transmit power 4 gear switch: 25mW/200mW/400mW/800mW;
  • Output 48 frequency points,
  • Frequency lock fast, the boot does not interfere with companions;
  • Built-in output power self-check function;
  • Full format video format: NTSC /PAL;
  • Wide input voltage range. low power consumption: 7V~36V,+12V/380mA@800mW;
  • Small size:36*36*3mm
  • Mounting holes 4-M3
  • Lightweight: 7.2g(excluding antenna)

Package Contents  

  • Prebuilt and tested Quadcopter
  • 1x XL5 V5 Frame
  • 1x RaceCam, 2.1mm lens camera
  • 1x Albatross RHCP 5.8g antenna
  • 2sets x Nazgul 5 inch 3-blades (Set of 4 - Color may vary)
  • 1x 20*200mm Microfiber PU Leather Battery Strap (Color May Vary)
  • 1x 20*250mm Microfiber PU Leather Battery Strap (Color May Vary)

 

Width:
40.00 (cm)
Height:
32.00 (cm)
Depth:
15.00 (cm)
Receiver Type:
PNP (No RX)