iFlight BumbleBee HD V2 - Frame Kit


iFlight BumbleBee HD V2 - Frame Kit

The BumbleBee HD V2 BNF features the amazing DJI digital FPV system which makes flying truly breathtaking. With the 720p 120fps video in your Goggles, DJI has set the bar at a new high for clarity and image quality in FPV experience.

The whole frame was reduced to a minimum size and weight. We came up with a 145mm diagonal motor distance for our new V2 (V1 142mm) and even fit the DJI Air Unit inside.

We've also added a new bumper approach with loads of protective 3D TPU parts to protect yourself and your drone just in case...


  • No Props or frame in view!

  • T700 Quality Carbon (40% more tensile strength compared to common 3K carbon)
  • Bumper prop guards to protect sensitive environment or yourself
  • Low Resonance frame construction (Less Jello, more Cinematic)


  • SD-Card Extension Port (on the tail end)
  • FC type-C Extension Port (on the tail end)
  • LED illuminated Logo
  • Upgraded EVA Protectors, Improved duct profile with less noise
  • Bottom carbon thickness increased from 2mm to 2.5mm
  • The Wheelbase increased from 142mm to 145mm


  • Wheelbase: 145mm

  • Bottom plate thickness: 2.5mm
  • Top plate thickness: 2mm
  • Top and bottom plate spacing: 27mm (aluminum column height 27mm)
  • Propeller size: 3 inch
  • FC pattern: 20*20mm,30.5*30.5mm
  • FPV cam spacing: 19mm
  • Weight: 171g (without battery)


  • 1 x BumbleBee Frame (HD) V2

  • 1 x TPU Antenna holder for DJI antenna
  • 2 x TPU camera side plate soft mount
  • 1 x iFlight Lipo Strap


25.00 (cm)
6.00 (cm)
25.00 (cm)