HTRC T240 Duo Touch Charger - 150W/10A - AC/DC Dual Channel

HTRC T240 Duo Touch Charger - 150W/10A - Dual Channel

The T240 Duo is a newly design dual balance charger from HTRC. Dual channels allow charging two different types of batteries simultaneously. Multi-function, high power, Utilizing 3.2 inch color LCD Touch screen display, easy operation, built-in cooling fan, DC 11-18V or AC 100-240V dual power. Designed for charging LiPo, LiFe, Lilon, LiHV, NiCd, NiMh & Pb Smart Batteries.
It can support power distribution in AC mode, total power 150W (CH1+CH2=150Watt). In DC mode, it works in 2 * 120W. Max charge current can reach 10A each port in both AC and DC mode.

  • Touch Screen
  • Full plastic shell, safe, compact, beautiful.
  • Twin-channel, charge two different kinds of batteries simultaneously.
  • High power, single port max 150W.
  • Practical for variety of batteries.LiPo LiFe Lilon NiCd NiMh Pb,and high power battery LiHV.
  • Automatic identification of Li-Po batteries cells counts
  • Adjustable digital DC Power.
  • Built in smart cooling fan for easy heat dissipation.
  • Built-In PFC AC adapter high efficiency.comes with power switch.
  • Graph display of charging status
  • Multiple charging modes.
    • Lipo/Lilo/LiFe/LiHv: balance charge, charge, storage, discharge.
    • NiMH/NiCd: Charge, Discharge, Cycle.
    • PB: Charge,Discharge,Trickle.
  • Multi-function:
    • Battery Meter: Display lithium battery cell counts,battery capacity percentage, each cell's voltage (does not support 1s battery).
    • TVC (Terminal voltage control): The Charger allows user to set the charge/discharge end voltage.
    • Lithium Battery internal Resistance Check: can display each cell's resistance. (does not support 1s battery)
    • Calibration: Cell voltage monitoring and calibration.
    • Smart battery: Smart battery I,II,III,(Need optional DJI Charging cable)
  • Data storage and loading
  • Re-peak and cycling of NiMH/NiCD battery.
  • Maximum Safety: Automatic charge current limit, Delta-peak sensitivity, capacity limit, processing time limit,temperature threshold.
  • Firmware update capable.

  • Input: AC 100-240V / DC 11-18V
  • Charge power: AC mode 150W (CH1+CH2=150Watt),DC mode 120W*2 =240W
  • Discharge power: Max 10W*2
  • Charge current range: 0.1-10A *2
  • Discharge current range: 0.1-2A*2
  • Lilon/LiPo/LiFe/LiHV cell count: 1-6cells*2
  • NiCd/NiMH battery cell count: 1-15cells*2
  • PB Battery voltage: 2-20V*2
  • Smart battery: I/II/III*2
  • Current drain for balancing: 500mA/cell
  • Net Weight: 0.48kg
  • Dimension: 145*105*64mm
  • Gross weight: 0.85kg
  • Package size: 215*155*75mm

  • 1 x T240 charger
  • 2 x Charge cable banana plug to T-Plug
  • 2 x Extension charge cable T-Plug to XT60
  • 2 x balance board with pin cord
  • 1 x AC Cord
  • 1 x DC Cord
  • 1 x User's Manual
6.00 (cm)
2.00 (cm)
4.00 (cm)