Happymodel DiamondF4 AIO (1S, 5A, ELRS)
SKU:
HM-R1
Happymodel DiamondF4 - 1S 5A AIO Brushless Flight Controller (ELRS 2.4G)
Specifications
FC Specifications
- MCU:STM32F411CEU6 (100MHZ, 512K FLASH)
- Sensor: ICM20689
- Original whoop size compatible
- Power supply: 1S battery input (DC 2.9V-4.35V)
- Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready
- Built-in Betaflight OSD(SPI Control)
- Built-in 5.8G OPEN VTX
- Built-in SPI ELRS V2.0/Frsky receiver
- Built-in 5V 1A BEC
ESC Specifications
- MCU upgraded to EFM8BB21
- Power supply: 1S LiPo/LiPo HV
- Current: 5A continuous peak 6A (3 seconds)
- Support BLHeliSuite programmable
- Factory firmware: O_H_5_REV16_8.HEX
- Default protocol: DSHOT600
RX Specifications
- Packet Rate option: 50Hz/150Hz/250Hz/500Hz
- ExpressLRS Firmware version: V2.0
- RF Frequency: 2.4GHz
- Antenna : Enameled copper wire antenna
- Telemetry output Power: <12dBm
- Receiver protocol: SPI ExpressLRS
- Compatible with ExpressLRS V2.0 TX Module
VTX Specifications
- Firmware version: OPENVTx
- Smartaudio v2.1
- PIT Mode support
- RCE Mode support
- Channels:48ch
- Transmitting Power: 0/RCE/25mw/100mw/400mw
- Power supply: DC 5V
- Current (5v): <650ma (400mw)

Package Contents
- 1 x AIO Flight Controller
- 4 x Mounting Screws
- 1 x Camera Cable
- 1 x Power Cable
- 4 x Vibration Gummies
- Width:
-
2.00
(cm)
- Height:
-
2.00
(cm)
- Depth:
-
0.50
(cm)
- Amps:
- 5
- Mounting:
- AIO
- CPU:
- F4
- Receiver Type:
- ExpressLRS