HappyModel 1S Mobula6 Whoop - ELRS
*May differ from pictures shown.
The Happymodel Mobula6 1S Whoop is a great racing FPV drone! The Mobula6 is a smooth and agile brushless drone that comes with the RunCam Nano 3, 0802 19000KV Motors, and many other cool features and specs that make this whoop a must-have! Now with Built-In ELRS Receivers!
ExpressLRS is currently the most popular remote control link system. It has the characteristics of low latency and high packet rate, and its link quality is very reliable.
VIDEO
Features
Built-In ExpressLRS Receiver Options
1S 65mm Brushless HD Whoop
Compatible with 1S Lipo/LIHV
RunCam Nano 3 Camera
Adjustable Camera Angle
Smooth and Agile Flight
Specifications
Item Name: Mobula6 ELRS 1S 65mm Brushless whoop drone BNF version
Size: 80x80mx7mm
Brand: Happymodel
Wheelbase: 65mm
Weight: 18.7g
Voltage:1S
MOTOR
Motor Dimensions: 9.5x14mm
No.of Cells (Lipo): 1S only
Model: SE0802 KV19000
Stator Diameter: 7mm
Configuration: 9N12P
Shaft Diameter: 1mm
Stator Length: 2mm
Weight: 1.46g
PROPELLERS
Center Hole Inner diameter: 1.0mm
Prop Disk Diameter: 31mm
Center Thickness: 5mm
HQprop31mm
Weight:0.2g
FC
ELRS F4 2G4 flight controller built-in SPI expresslrs 2.4G receiver
Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready
MCU:STM32F411CEU6 (100MHZ, 512K FLASH)
Power supply: 1S battery input (DC 2.9V-4.35V)
Sensor: MPU-6000(SPI connection)
Built-in Betaflight OSD(SPI Control)
Center Hole Inner diameter:1.0mm
Board size: 28.5 * 28.5MM
Prop Disk Diameter:31mm
Built-in voltage detection
Center Thickness:5mm
Built-in 5V 1A BEC
Built-in 5.8G VTX
Weight:0.2g
ONBOARD 4-in-1 ESC
Power supply: 1S LiPo/LiPo HVCurrent: 5A continuous peak 6A (3 seconds)
Factory firmware: O_H_5_REV16_7.HEX
Support BLHeliSuite programmable
MCU upgraded to EFM8BB21
Default protocol: DSHOT600
ONBOARD 5.8GHZ VTX
Frequency: 5.8GHz 5bands 40 channels
Current consumption: 300mA(type)
With Race bandSmartaudio ready
Output power: 25mw-200mw
Input voltage: 3.3V 5.5V
Frequency: 40CH
RUNCAM NANO 3 CAMERA
Signal System: PAL/NTSC Non-Switchable
Dimensions: L14mm*W14mm*H9mm
Current: 110mA@5V 120mA@3.3V
Min. Illumination: 0.01Lux@1.2F
Horizontal Resolution: 800TVL
Electronic Shutter Speed: Auto
Auto Gain Control (AGC): Auto
Lens : 2.1mm(M8) FOV 160°
Image Sensor: 1/3″ CMOS
Model: RunCam Nano 3
Housing Material: ABS
Power:DC 3-5.5V
S/N Ratio: >50dB
Net Weight: 1.2g
Day/Night: Color
D-WDR: Auto
BATTERY
Continuous Discharge Rate: 30C
Weight: 8gConnector: PH2.0
Size: 57mmx12mmx7mm
Capacity:300mAh
Voltage:3.8v
Package Contents
1x Happymodel Mobula6 1S 65mm Brushless Whoop w/ RunCam Nano 3 - ELRS
1x HQProp 31mm Bi-Blade Propeller (Set of 4)
4x 1S 300mAh 30C LiHV Battery
1x 1S Lipo/LIHV USB Charger
1x Screwdriver
1x Prop Tool