FlyWoo Goku 406S 40A 20x20 4-in-1 ESC - BLHeli_32

SKU:
FLYWOO-406S-ESC
$67.99

Out of stock

Out of Stock

FlyWoo Goku 406S 40A 20x20 4-in-1 ESC - BLHeli_32

 

FEATURES
  • High performance 32-bit microprocessor with the running frequency of up to 48MHz for excellent performance.
  • BLHeli_32 firmware is the third generation BLHeli, following base BLHeli and BLHeli-S.
  • All codes use damped light mode. Damped light does regenerative braking, causing very fast motor retardation, and inherently also does active freewheeling.
  • The code supports features to prevent sync loss. There are tunable parameters that can make the code run well even in the most demanding situations, although default settings will work excellently in normal operating environments.
  • The code supports regular 1-2ms pulse width input, as well as Oneshot125 (125-250us), Oneshot42 (41.7-83.3us) and Multishot (5-25us).
  • Dshot signaling is supported at any rate up to at least Dshot1200. The input signal is automatically detected by the ESC upon power up.
  • The code also supports a beacon functionality, where the ESC will start beeping after a given time of zero throttle. This can be very useful for finding lost crafts.



SPECIFICATIONS

  • Cont. Current: 40A
  • Peak Current: 50A
  • BEC: none
  • LiPo Cells: 2-6S
  • Weight: 7.2g
  • Mounting Hole: 20x20mm
  • Support Telemetry/Current Meter
  • Support Oneshot, Multishot, DShot150/300/600 and DShot1200

 

NOTICE

  • Include 1pc 35V 470uf Capacitor.
  • Better to use with Flywoo series Flight Controller.
  • 8 Pin from left to right, GND, BAT, M1, M2, M3, M4, CUR, TX
    • if using other fc, pls double check whether if its' connector is compatible.



PACKAGE CONTENTS

  • 1 x GOKU406S 4in1 ESC
  • 1 x Capacitor
  • 1 x 8pin Connector Cable
  • 1 x Bag of Screws
Width:
2.00 (cm)
Height:
1.00 (cm)
Depth:
3.00 (cm)
Amps:
40
Mounting:
20x20