BetaFPV 20A AIO Flight Controller - 20A, 2-4S

SKU:
AIO-BETA-20A-363610_1
$81.99

Out of stock

Out of Stock
BetaFPV 20A AIO Flight Controller - 20A, 2-4S

For a new generation of toothpick drone - New AIO Brushless FC can handle 20A continuous current (25A burst), which is the first 20A All-in-one FC EVER! With massive levels of performance capability while still weighing in at only 6.63g.

Breaking through the limit of toothpick power, exploring more possibilities in 3''-4'' drones. This board is your best choice to DIY your own toothpick drone that is tailored to your requirements.
 
FEATURES
  • This new board can handle 20A continuous current (25A burst), which is the first 20A All-in-one FC on the market
  • Comes with 4*Motor Pluggable Pins and Not Pre-solder in default, fits your needs of self-assembly best
  • Compatible with 120Xmotor, 130X, and140X motors
  • USB port is mounted on the side, you have more possibilities of mounting it while still maintaining access to the USB port
  • All of the solder pads are at the edge of FC, which is a convenience to solder
  • Double-sided motor solder pad. Pins pad and wires pad are both built-in for motors connection
  • Integrated with a Betaflight MATEKF411 processor FC, Betaflight OSD, F4 MCU, and 20A ESC, support 1-4S battery





FLIGHT CONTROLLER SPECIFICATIONS
  • CPU: STM32F411CEU6 (100MHZ)
  • Six-Axis: MPU6000 (SPI connection)
  • Size: 32.5*32.5mm (26.5mm mounting holes)
  • Firmware version: Betaflight MATEKF411 (MK41)
  • OSD: Built-in BetaFlight OSD (OSD chip: AT7456E)
  • Receiver: Support Frsky XM/XM+ Receiver/ Futaba Receiver/ Flysky Receiver/ TBS Crossfire Receiver/DSMX Receiver
  • Support programmable LED like WS2812 etc
  • Built-in current sensor
  • Weight: 6.63g

ESC SPECIFICATIONS
  • Support BLheli/BLHELI_S suite Pass-through ready
  • Support PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600
  • Input voltage: 1S-4S Lipo
  • Continuous current: 20A
  • Peak current: 25A
  • Firmware: BLHELI_S
  • Motor Connectors: 1.25mm header pins connector
 




PACKAGE CONTENTS
  • 1 x AIO
  • 1 x Set of Gummies
  • 4 x Motor Plugs
  • 1 x Set of Hardware
Width:
0.05 (cm)
Height:
0.05 (cm)
Depth:
0.05 (cm)
Amps:
20
Mounting:
AIO
CPU:
F4